Sink BULL™ – Replacement Grips
$42.95 – $45.95Price range: $42.95 through $45.95
Replacement Grip Sets for all Sink BULLs™. These will replace the older, bicycle style, grip on the ORIGINAL Sink BULL as well as the newer Sink BULL™ LT.
- USA made grip
- Sold as a pair complete with hardware
- Longer Screw for Original Sink BULL
- Shorter Screw for Sink BULL LT
Related Products
O-Ring
NO. 34, O-Ring, Sold individually.
For use on the Original Electric Seam Phantom
Not for use on Seam Phantom 2.0
Arbor Extension
For use with an Air Polisher on an Original Seam Phantom or Seam Phantom 2.0
Updated Version of our hex Arbor Extension.
- Stainless steel construction
- 1 1/4″ long
- Center water feed compatible
- Standard 5/8-11 internal and external threads
- Made in the U.S.A.
Also available in M14 thread.
Screws
No. 1, Screws (#10 x 1/2″ Stainless Button Head Screws)
Sold in a pack of 10 screws
Multiple uses:
- Attaches the white rub plate and valve bracket on the original Seam Phantom®.
- Attaches the white rub plates, valve bracket and spray shield on Seam Phantom® 2.0
- Attaches the white rub plate, brackets and P-clips on the Original Sink BULL™
- Buy multiple packs if you require more than 10 screws.
- Does NOT fit Sink BULL™ LT
No. 310, Screws (#10 x 3/8″ Stainless Button Head Screws)
Sold in a pack of 10 screws
- Attaches the white rub plate, brackets and P-clips on the Sink BULL™ LT
- Buy multiple packs if you require more than 10 screws.
- Does NOT fit the Original Sink BULL™ or Seam Phantom Models
Wheel Axle Assembly
NO LONGER AVAILABLE
NO. 15, 17, 18. Sold as a kit with (1) #15 wheel axles, (1) #17 bearing shims, and (1) #18 lock nuts.
Rapid-Z™ Bolt and Washer Kit
No. 21 & No. 22 Bolt Kit for Rapid Z™-CUT and Rapid Z™-DRUM
Sold as a kit with (1) #21 bolt and (1) #22 washer
Used to retain the blades and drum wheels on the Rapid Z™-CUT and Rapid Z™-DRUMS
Rapid Z™-CUT Screws
No. 23, Screws for bearing ring
Sold in a pack of (4) #23 screws
Replacement screws used to attach the large outer bearing ring on a Rapid Z™-CUT
Arbor Spacer
Arbor Spacer for use with all Electric Seam Phantoms®. Installed between the red snail lock adapter and the grinder to locate the turbo at the most useful position. Works with 5/8-11 or M14 threads.
- 0.19″ thick for all original Seam Phantoms® and most Seam Phantom® 2.0 versions
- 0.32″ thick for Seam Phantom® 2.0 with Metabo grinder ONLY
Guide Wheel Assembly
Replacement wheel for all Seam Phantoms® – includes wheel and stainless bearing. Price is for one complete wheel. Order quantity (2) if you need a pair.
- Standard profile for use with the original Seam Phantom® & Glide Guide.
- Angled profile for use with Seam Phantom® 2.0 & Ultra Guide