Looking for replacement parts? Click Here to visit our Web Store!
Built for Each Other
The Rapid ZTM line are all purpose built on stainless steel arbors to work together. Both Rapid ZTM-CUT and Rapid ZTM-DRUM products are designed to be the exact same height so there is no need to readjust the height on the Sink BULLTM when grinding sink cutouts.
Rapid Z™-DRUMS
The 3" vacuum brazed diamond drum wheels are the first of their kind with reversible and replaceable drums!
Specifically designed and engineered to work hand-in-hand with the Rapid ZTM-CUT and the Sink BULLTM to create a simple, cost effective system for producing perfect sink cutouts every time.
1" vacuum brazed diamond drum wheels are also available to get in those tight radius corners!
Reversible
When the diamonds begins to dull, flip the drum over by removing one bolt and extend tool life by utilizing the back side of the diamonds!
Replaceable
When the diamonds are completely dull, save time and money by simply replacing the diamond drum!
Rapid Z™-CUT
Introducing the 3" Rapid ZTM-CUT grinding wheel. It features a stainless steel arbor, 5/8-11 mounting thread (**M14 thread available**) and center water feed. The stacked, 3" diamond blades are easy to replace and rearrange. Originally designed to profile sinks on the Sink BULLTM this configuration results in extremely fast material removal.
With Bearing Template Follower
The original version of the Rapid ZTM-CUT features twelve stacked blades with a bearing template follower. This configuration excels at grinding slab material, up to 3cm thick, to the shape of a template. Inside holes for sinks or outside corners can all be rapidly profiled. The template follower is sized to always leave a small amount of material. This allows a vacuum brazed drum wheel (also with bearing) to be used for final clean up.
2 Stage Template Follower Bearing
The template follower incorporates a two stage design. After the blades wear halfway down the large outer ring can be removed by removing four screws. This helps minimize the amount of material left to remove with the final drum wheel.
Sink BULL™ and Rapid Z™-CUT
Promotional Video
Note: This video was made before the NSI Solutions Rapid ZTM-DRUMS were available. The new drums make the process even faster by eliminating the need for height adjustments.
No Bearing
Also available without a top bearing - this version of the Rapid ZTM-CUT uses seventeen blades and is excellent for free hand shaping or can be adapted to 1/2 gas thread for CNC use.
