3″ Rapid Z™-CUT Replacement Bearing
$24.70
No. 24, Bearing for Rapid Z™-CUT
Replacement bearing for the Rapid Z™-CUT with template follower
Click Here to Watch Our Rapid Z™ Bearing Replacement Video!
Related Products
Rapid Z™-CUT Cap
No. 103, Cap for Rapid Z™-CUT
Retains the blades on the Rapid Z™-CUT. Works on Rapid Z™-CUT with and without a template follower bearing
Adjustment Nut
Replacement adjustment nut for the Seam Phantom®.
- Solid brass nut for all Original Seam Phantoms®
- Anti-rattle red plastic with brass insert for all Seam Phantom® 2.0
*Updated* Spray Shield
No. 105. Stainless steel spray shield for the Original Electric Seam Phantom® . This replaces the old black aluminum spray shield.
Not for use on Seam Phantom 2.0.
Set Screws
NO. 122, Set screws.
Sold as a pack of (5) #122 set screws
Fits #121 air polisher adapter (red orientation dot on top) on a Seam Phantom (air version). Previous air adapters (white orientation dot on top) used a smaller set screw. Call for availability of the smaller screw.
Screws
No. 1, Screws (#10 x 1/2″ Stainless Button Head Screws)
Sold in a pack of 10 screws
Multiple uses:
- Attaches the white rub plate and valve bracket on the original Seam Phantom®.
- Attaches the white rub plates, valve bracket and spray shield on Seam Phantom® 2.0
- Attaches the white rub plate, brackets and P-clips on the Original Sink BULL™
- Buy multiple packs if you require more than 10 screws.
- Does NOT fit Sink BULL™ LT
No. 310, Screws (#10 x 3/8″ Stainless Button Head Screws)
Sold in a pack of 10 screws
- Attaches the white rub plate, brackets and P-clips on the Sink BULL™ LT
- Buy multiple packs if you require more than 10 screws.
- Does NOT fit the Original Sink BULL™ or Seam Phantom Models
Hose Assembly
No. 115. Hose assembly for Seam Phantom® & Sink BULL™
Sold as a complete 6′ assembly with a brass threaded male fitting to attach to the valve and a brass female garden hose fitting on the opposite end. All hose assemblies will be supplied with a straight fitting to attach to the valve instead of the old 45 degree fitting.
For use on all Electric Seam Phantoms® that require external water feed plus the Sink BULL™.
O-Ring
NO. 34, O-Ring, Sold individually.
For use on the Original Electric Seam Phantom
Not for use on Seam Phantom 2.0
White Rub Plate – Original Air and Seam Phantom 2.0
This Rub Plate is designed for use with the Original Air Seam Phantom and is the main rub plate on Seam Phantom 2.0