4″ Redeemer Resin Abrasive, 500 Grit
$38.95
4″ Flexible Resin diamond abrasive with hook & loop attachment
- 500 Grit
- 3.9″ actual outside diameter
- Color-coded blue
- Perfect for top polishing natural granite and quartzite
- This is the same type of resin pad we supply in our Top Polish Kit
- Requires less down pressure than other resin pads used for top polishing
- Will create a polish with exceptional clarity at low speeds or high speeds
- Always use plenty of water – never run dry
- Drive it with a True 4″ Rigid Hook and Loop backer when top polishing
Related Products

SL3® 3 Inch Rigid Turbo Abrasive, 300 Grit
3″, rigid backed, turbo abrasive
- 300 grit – Popular replacement turbo for the Seam Phantom®
- Wet use only
- 3 1/8″ actual outside diameter
- Locks into the SL3® Snail Lock Adapter
- Maximum RPM 4000

SL3® 3 Inch Floating Turbo Abrasive, 150 Grit (not for dressing seams)
3″ Turbo abrasive with semi-rigid plastic laminate and hook & Loop attachment for use with the 3″ Center Hub Backer and SL3® Snail Lock Adapter.
- 150 grit
- Wet use only
- 3 1/8″ outside diameter
- Color-coded red
- Maximum RPM 4000
*NOT For Dressing Seams With The Seam Phantom®

SL3® Cup Wheel – 2 Inch
2″ cup Wheel for use with the Electric or Air Seam Phantom to create the undercut or back bevel.
- Locks into the SL3® Snail Lock Adapter
- Maximum RPM 10,000

SL3® 3 Inch Floating Turbo Abrasive, 60 Grit (not for dressing seams)
3″ Turbo abrasive with semi-rigid plastic laminate and hook & Loop attachment for use with the 3″ Center Hub Backer and SL3® Snail Lock Adapter.
- 60 grit
- Wet use only
- 3 1/8″ outside diameter
- Color-coded light green
- Maximum RPM 4000.
*NOT For Dressing Seams With The Seam Phantom®

SL3® 3 Inch Floating Turbo Abrasive, 2000 Grit
3″ Turbo abrasive with semi-rigid plastic laminate and hook & Loop attachment for use with the 3″ Center Hub Backer and SL3® Snail Lock Adapter.
- 2000 grit
- Wet use only
- 3 1/8″ outside diameter
- Color-coded orange
- Maximum RPM 4000
*NOT For Dressing Seams With The Seam Phantom®

SL3® 3″ RIGID Hook and Loop Backer (3.0″ actual diameter)
3″, RIGID, hook and loop backer (3.0″ actual diameter)
- Locks into the SL3® Snail Lock Adapter
- Designed with a “hook” face for use with hook & loop style abrasive
- Can be used with 3″ turbos, cut down resin pads, or small fiber pads
- This is the 3″ backer we provide in our top polish kit to drive the 3 1/4″ Natural Tan Fiber Pad

SL3® 3 Inch, H&L CTR Hub Backer
Hook & loop backer For use with the 3″ Floating Turbos
Locks into the SL3® Snail Lock Adapter
*NOT for use with the Seam Phantom®

SL3® 4″ FLEXIBLE Hook and Loop Backer (3.6″ actual diameter)
4″, Flexible, hook and loop backer (3.6″ actual diameter to fit 4″ resin abrasives)
- Locks into the SL3® Snail Lock Adapter
- Designed with a “hook” face for use with hook & loop style abrasives
- Intended for use with a flexible 4″ resin pad to polish smooth inside curves
- Perfect for polishing inside curves on sink cutouts