Arbor Extension (M14 Version) 
Gauge Blocks, Pair, Replacement
$21.95 – $45.95
Used with the Seam Phantom to set the proper offset distance before clamping the Guide. Supplied as a pair with all Seam Phantom® packages
- Silver aluminum version for all Original Seam Phantoms® and the Glide Guide
- Red plastic version for Seam Phantom® 2.0 and the Ultra Guide
Related Products
Electric to Air Kit
This kit allows you to convert your Original Electric Seam Phantom® to use an air polisher. It comes with Air Adapter, # 121 (complete with all required set screws), and Stainless Steel Arbor Extension, #123, with 5/8-11 thread.
These parts are also compatible with Seam Phantom 2.0 but additional parts may be required to complete a conversion depending on the starting configuration.
The air adapter fits polishers with a maximum nose diameter of 2.125″, (Click Here for Image).
Also available in M14 thread. Please call the office to order a kit with M14 thread.
Click Here to Watch Our Electric to Air Conversion Kit Video!
SL3® 3 Inch Rigid Turbo Abrasive, 150 Grit
3″, rigid backed, turbo abrasive
- 150 grit – Popular replacement turbo for the Seam Phantom®
- Wet use only
- 3 1/8″ actual outside diameter
- Locks into the SL3® Snail Lock Adapter
- Maximum RPM 4000
White Rub Plate – Original Air and Seam Phantom 2.0
This Rub Plate is designed for use with the Original Air Seam Phantom and is the main rub plate on Seam Phantom 2.0
Grip Knob
Upper grip knob for the Seam Phantom
|
Metric Screw and Shim Washer
No. 27 & No. 31, Original Seam Phantom attachment screws
Sold as a kit with (4) #27 screws and (4) #31 shim washers
Screws used to attach the Original Seam Phantom to a Makita Grinder or air polisher adapter, and Shim washers used to fine-tune the grinding angle
Not for use with Seam Phantom 2.0
Arbor Spacer
Arbor Spacer for use with all Electric Seam Phantoms®. Installed between the red snail lock adapter and the grinder to locate the turbo at the most useful position. Works with 5/8-11 or M14 threads.
- 0.19″ thick for all original Seam Phantoms® and most Seam Phantom® 2.0 versions
- 0.32″ thick for Seam Phantom® 2.0 with Metabo grinder ONLY
SL3® Cup Wheel – 2 Inch
2″ cup Wheel for use with the Electric or Air Seam Phantom to create the undercut or back bevel.
- Locks into the SL3® Snail Lock Adapter
- Maximum RPM 10,000
Hose Assembly
No. 115. Hose assembly for Seam Phantom
Sold as a complete 6′ assembly with a brass threaded male fitting to attach to the valve and a brass female garden hose fitting on the opposite end. All hose assemblies will be supplied with a straight fitting to attach to the valve instead of the old 45 degree fitting.
For use on all Electric Seam Phantoms that require external water feed.