Set Screws 
Gauge Blocks, Pair, Replacement
$42.15
Used with the Original Seam Phantom to set the proper offset distance before clamping the Glide Guide. Supplied as a pair with the Original Seam Phantom® package.
Not for use with Seam Phantom 2.0 or Ultra Guide
Related Products
SL3® Cup Wheel – 2 Inch
2″ cup Wheel for use with the Electric or Air Seam Phantom to create the undercut or back bevel.
- Locks into the SL3® Snail Lock Adapter
- Maximum RPM 10,000
SL3® 3 Inch Rigid Turbo Abrasive, 60 Grit
3″, rigid backed, turbo abrasive
- 60 grit – Popular replacement turbo for the Seam Phantom®
- Wet use only
- 3 1/8″ actual outside diameter
- Locks into the SL3® Snail Lock Adapter
- Maximum RPM 4000
Glide Guide, 92″
92″ Glide Guide Rail for use with the ORIGINAL Seam Phantom. Can be used to produce seams up to 86″ long. This was our preferred guide rail design for over a decade. Also available in 48″ and 72″
*Note: Does not work with Seam Phantom 2.0
*Note: This item is considered “oversize” by FedEx. The shipping cost will include additional fees for “oversize” and handling.
Glide Guide, 48″
*Note: Does not work with Seam Phantom 2.0
Ultra Guide, 46″
Designed from the ground-up for use with the Seam Phantom® 2.0. This guide provides next-level accuracy when producing superior seams in stone slab material.
This is the guide provided with every new Seam Phantom® 2.0
*Note: This guide will not work with the original Seam Phantom unless you change out the wheels
Electric to Air Kit
This kit allows you to convert your Original Electric Seam Phantom® to use an air polisher. It comes with Air Adapter, # 121 (complete with all required set screws), and Stainless Steel Arbor Extension, #123, with 5/8-11 thread.
These parts are also compatible with Seam Phantom 2.0 but additional parts may be required to complete a conversion depending on the starting configuration.
The air adapter fits polishers with a maximum nose diameter of 2.125″, (Click Here for Image).
Also available in M14 thread. Please call the office to order a kit with M14 thread.
Click Here to Watch Our Electric to Air Conversion Kit Video!
White Rub Plate – Electric
This rub plate is intended to be used with the Original Electric Seam Phantom. Also known as “The Shoe”. This version has extra holes and channels to distribute the water routed through the rub plate on the original design.
Not for use on Seam Phantom 2.0
Arbor Extension (M14 Version)
For use with an Air Polisher on an Original Seam Phantom or Seam Phantom 2.0
- Stainless steel construction
- 1 1/4″ long
- Center water feed compatible
- M14 internal and external threads
- Made in the U.S.A.
Also available in 5-8/11 Thread.