Glide Guide, 48" 
Glide Guide, 72″
$245.00
72″ Glide Guide Rail for use with the ORIGINAL Seam Phantom. Can be used to produce seams up to 66″ long. This was our preferred guide rail design for over a decade. Also available in 48″ and 92″
*Note: Does not work with Seam Phantom 2.0
*Note: This item is considered “oversize” by FedEx. The shipping cost will include additional fees for “oversize” and handling.
Related Products
SL3® 3 Inch Rigid Turbo Abrasive, 150 Grit
3″, rigid backed, turbo abrasive
- 150 grit – Popular replacement turbo for the Seam Phantom®
- Wet use only
- 3 1/8″ actual outside diameter
- Locks into the SL3® Snail Lock Adapter
- Maximum RPM 4000
Arbor Extension (M14 Version)
For use with an Air Polisher on an Original Seam Phantom or Seam Phantom 2.0
- Stainless steel construction
- 1 1/4″ long
- Center water feed compatible
- M14 internal and external threads
- Made in the U.S.A.
Also available in 5-8/11 Thread.
Grip Knob
Upper grip knob for the Seam Phantom
|
SL3® Snail Lock Adapter (M14 Version)
- Fits M14 Threads
- Balanced to eliminate vibration
- Snail lock attachment grips all SL3® components
Also available in 5/8-11 thread.
Electric to Air Kit
This kit allows you to convert your Original Electric Seam Phantom® to use an air polisher. It comes with Air Adapter, # 121 (complete with all required set screws), and Stainless Steel Arbor Extension, #123, with 5/8-11 thread.
These parts are also compatible with Seam Phantom 2.0 but additional parts may be required to complete a conversion depending on the starting configuration.
The air adapter fits polishers with a maximum nose diameter of 2.125″, (Click Here for Image).
Also available in M14 thread. Please call the office to order a kit with M14 thread.
Click Here to Watch Our Electric to Air Conversion Kit Video!
SL3® 3 Inch Rigid Turbo Abrasive, 300 Grit
3″, rigid backed, turbo abrasive
- 300 grit – Popular replacement turbo for the Seam Phantom®
- Wet use only
- 3 1/8″ actual outside diameter
- Locks into the SL3® Snail Lock Adapter
- Maximum RPM 4000
Arbor Spacer
Arbor Spacer for use with all Electric Seam Phantoms®. Installed between the red snail lock adapter and the grinder to locate the turbo at the most useful position. Works with 5/8-11 or M14 threads.
- 0.19″ thick for all original Seam Phantoms® and most Seam Phantom® 2.0 versions
- 0.32″ thick for Seam Phantom® 2.0 with Metabo grinder ONLY
Updated Wheel Axle Assembly
Updated version of the GWAF.
Sold as a kit (1) #215 Brass Axle, (1) #17 Bearing Shim, (1) #216 Screw, and (1) #217 Washer.
Two Axle assemblies required per Seam Phantom
Universal Replacement for ALL Seam Phantoms.