Rapid Z™-CUT Bearing Press
$28.85
No. 401, Bearing press
This is the press used to install the bearing in the Rapid Z™-CUT bearing replacement video. We offer it here as a convenience.
Click Here to Watch Our Rapid Z™ Bearing Replacement Video!
Related Products

Arbor Extension (M14 Version)
For use with an Air Polisher on an Original Seam Phantom or Seam Phantom 2.0
- Stainless steel construction
- 1 1/4″ long
- Center water feed compatible
- M14 internal and external threads
- Made in the U.S.A.
Also available in 5-8/11 Thread.

*Updated* Spray Shield
No. 105. Stainless steel spray shield for the Original Electric Seam Phantom® . This replaces the old black aluminum spray shield.
Not for use on Seam Phantom 2.0.

Arbor Spacer
Arbor Spacer for use with all Electric Seam Phantoms®. Installed between the red snail lock adapter and the grinder to locate the turbo at the most useful position. Works with 5/8-11 or M14 threads.
- 0.19″ thick for all original Seam Phantoms® and most Seam Phantom® 2.0 versions
- 0.32″ thick for Seam Phantom® 2.0 with Metabo grinder ONLY

Screws
No. 1, Screws
Sold in a pack of (10) #1 screws
Attaches the white rub plate and valve bracket on the original Seam Phantom®. Also used for the rub plates, valve bracket and spray shield on Seam Phantom® 2.0 LT & DLX versions. Buy multiple packs if you require more than 10 screws.

Set Screws
NO. 122, Set screws.
Sold as a pack of (5) #122 set screws
Fits #121 air polisher adapter (red orientation dot on top) on a Seam Phantom (air version). Previous air adapters (white orientation dot on top) used a smaller set screw. Call for availability of the smaller screw.

P-Clip Kit
NO. 5 & No. 6, P-Clip and screw kit
Sold as a kit with (1) #5 P-Clip and (1) #6 screw
Used to attach the rub plate water supply tube to the Original Electric Seam Phantom body.
Not for use on Seam Phantom 2.0

Cut Tube Repair Kit
For Original Electric Seam Phantoms with a cut tube. This kit also replaces the grit shield with a larger version to prevent further cutting. The arbor spacer allows for more wear from the SL3 turbos. Note: the current tube is made from an upgraded material and is now red.
Not for use with Seam Phantom 2.0
Kit includes:
(1) Vinyl Tube
(1) Grit Shield
(1) Arbor Spacer (Thickness 0.19 inches)

Set Screws
NO. 19. Sold in a pack of 2.
Set Screws for the original black valve bracket used on the original electric Seam Phantoms®
Not for use on Seam Phantom 2.0