Arbor Extension 
3″ Rapid Z™-CUT Inner Ring
$74.40
No 105, Inner bearing ring
Inner ring that is pressed onto the template follower bearing on a Rapid Z™-CUT
Bearing sold separately
Related Products
Screws
No. 1, Screws
Sold in a pack of (10) #1 screws
Attaches the white rub plate and valve bracket on the original Seam Phantom®. Also used for the rub plates, valve bracket and spray shield on Seam Phantom® 2.0 LT & DLX versions. Buy multiple packs if you require more than 10 screws.
White Rub Plate – Electric
This rub plate is intended to be used with the Original Electric Seam Phantom. Also known as “The Shoe”. This version has extra holes and channels to distribute the water routed through the rub plate on the original design.
Not for use on Seam Phantom 2.0
Hose Assembly
No. 115. Hose assembly for Seam Phantom
Sold as a complete 6′ assembly with a brass threaded male fitting to attach to the valve and a brass female garden hose fitting on the opposite end. All hose assemblies will be supplied with a straight fitting to attach to the valve instead of the old 45 degree fitting.
For use on all Electric Seam Phantoms that require external water feed.
Cut Tube Repair Kit
For Original Electric Seam Phantoms with a cut tube. This kit also replaces the grit shield with a larger version to prevent further cutting. The arbor spacer allows for more wear from the SL3 turbos. Note: the current tube is made from an upgraded material and is now red.
Not for use with Seam Phantom 2.0
Kit includes:
(1) Vinyl Tube
(1) Grit Shield
(1) Arbor Spacer (Thickness 0.19 inches)
Metric Screw and Shim Washer
No. 27 & No. 31, Original Seam Phantom attachment screws
Sold as a kit with (4) #27 screws and (4) #31 shim washers
Screws used to attach the Original Seam Phantom to a Makita Grinder or air polisher adapter, and Shim washers used to fine-tune the grinding angle
Not for use with Seam Phantom 2.0
Arbor Extension
For use with an Air Polisher on an Original Seam Phantom or Seam Phantom 2.0
Updated Version of our hex Arbor Extension.
- Stainless steel construction
- 1 1/4″ long
- Center water feed compatible
- Standard 5/8-11 internal and external threads
- Made in the U.S.A.
Also available in M14 thread.
Adjustment Nut
Replacement adjustment nut for the Seam Phantom®.
- Solid brass nut for all Original Seam Phantoms®
- Anti-rattle red plastic with brass insert for all Seam Phantom® 2.0
Bolt
NO. 16, Bolt to attach the Original Seam Phantom Knob, Sold individually
Not for use on Seam Phantom 2.0