Ultra Guide, 46″ (Cosmetic Blem)
$265.00 Original price was: $265.00.$212.00Current price is: $212.00.
Designed from the ground-up for use with the Seam Phantom® 2.0. This guide provides next-level accuracy when producing superior seams in stone slab material.
This is the guide provided with every new Seam Phantom® 2.0
These guides are functionally perfect but contain ugly scratches, gouges and anodizing burns. Too good to throw away – we are offering them at 20% discount to our customers!!
**Limited Quantity**
*Note: This guide will not work with the original Seam Phantom unless you change out the wheels
2 in stock
Related Products
Set Screws
NO. 122, Set screws.
Sold as a pack of (5) #122 set screws
Fits #121 air polisher adapter (red orientation dot on top) on a Seam Phantom (air version). Previous air adapters (white orientation dot on top) used a smaller set screw. Call for availability of the smaller screw.
Metric Screw and Shim Washer Kits
SCREW KIT 27 – Contains (4) #27 screws and (4) #31 shim washers. These screws are used to attach the Original Seam Phantom to a Makita Grinder or air polisher adapter. The shim washers are used to fine-tune the grinding angle.
SCREW KIT 327 – Contains (4) #327 screws and (4) #31 shim washers. These are the longer screws used to attach a modified Seam Phantom to a Makita Center Water Polisher (PW5001C) through an adapter. The shim washers are used to fine-tune the grinding angle.
Neither of these kits is used for Seam Phantom 2.0
SL3® Snail Lock Adapter
- Fits 5/8-11 Threads
- Balanced to eliminate vibration
- Snail lock attachment grips all SL3® components
Also available in M14 thread.
Tube Fitting
NO. 20, Tube Fitting, Sold Individually, color may vary
For use on the Original Electric Seam Phantom to connect the rub plate water supply tube to the valve
Not for use on Seam Phantom 2.0
Screws
No. 1, Screws (#10 x 1/2″ Stainless Button Head Screws)
Sold in a pack of 10 screws
Multiple uses:
- Attaches the white rub plate and valve bracket on the original Seam Phantom®.
- Attaches the white rub plates, valve bracket and spray shield on Seam Phantom® 2.0
- Attaches the white rub plate, brackets and P-clips on the Original Sink BULL™
- Buy multiple packs if you require more than 10 screws.
- Does NOT fit Sink BULL™ LT
No. 310, Screws (#10 x 3/8″ Stainless Button Head Screws)
Sold in a pack of 10 screws
- Attaches the white rub plate, brackets and P-clips on the Sink BULL™ LT
- Buy multiple packs if you require more than 10 screws.
- Does NOT fit the Original Sink BULL™ or Seam Phantom Models
Updated Wheel Axle Assembly
Updated version of the GWAF.
Sold as a kit (1) #215 Brass Axle, (1) #17 Bearing Shim, (1) #216 Screw, and (1) #217 Washer.
Two Axle assemblies required per Seam Phantom
Universal Replacement for ALL Seam Phantoms.
Arbor Spacer
Arbor Spacer for use with all Electric Seam Phantoms®. Installed between the red snail lock adapter and the grinder to locate the turbo at the most useful position. Works with 5/8-11 or M14 threads.
- 0.19″ thick for all original Seam Phantoms® and most Seam Phantom® 2.0 versions
- 0.32″ thick for Seam Phantom® 2.0 with Metabo grinder ONLY
SL3® 3 Inch Rigid Turbo Abrasive, 60 Grit
3″, rigid backed, turbo abrasive
- 60 grit – Popular replacement turbo for the Seam Phantom®
- Wet use only
- 3 1/8″ actual outside diameter
- Locks into the SL3® Snail Lock Adapter
- Maximum RPM 4000

