Arbor Spacer
$10.95 – $12.95
Arbor Spacer for use with all Electric Seam Phantoms®. Installed between the red snail lock adapter and the grinder to locate the turbo at the most useful position. Works with 5/8-11 or M14 threads.
- 0.19″ thick for all original Seam Phantoms® and most Seam Phantom® 2.0 versions
- 0.32″ thick for Seam Phantom® 2.0 with Metabo grinder ONLY
Related Products

SL3® Snail Lock Adapter (M14 Version)
- Fits M14 Threads
- Balanced to eliminate vibration
- Snail lock attachment grips all SL3® components
Also available in 5/8-11 thread.

Adjustment Nut
Replacement adjustment nut for the Seam Phantom®.
- Solid brass nut for all Original Seam Phantoms®
- Anti-rattle red plastic with brass insert for all Seam Phantom® 2.0

SL3® 3 Inch Rigid Turbo Abrasive, 150 Grit
3″, rigid backed, turbo abrasive
- 150 grit – Popular replacement turbo for the Seam Phantom®
- Wet use only
- 3 1/8″ actual outside diameter
- Locks into the SL3® Snail Lock Adapter
- Maximum RPM 4000

SL3® Snail Lock Adapter
- Fits 5/8-11 Threads
- Balanced to eliminate vibration
- Snail lock attachment grips all SL3® components
Also available in M14 thread.

SL3® Cup Wheel – 2 Inch
2″ cup Wheel for use with the Electric or Air Seam Phantom to create the undercut or back bevel.
- Locks into the SL3® Snail Lock Adapter
- Maximum RPM 10,000

Glide Guide, 92″
92″ Glide Guide Rail for use with the ORIGINAL Seam Phantom. Can be used to produce seams up to 86″ long. This was our preferred guide rail design for over a decade. Also available in 48″ and 72″
*Note: Does not work with Seam Phantom 2.0
*Note: This item is considered “oversize” by FedEx. The shipping cost will include additional fees for “oversize” and handling.

White Rub Plate – Electric
This rub plate is intended to be used with the Original Electric Seam Phantom. Also known as “The Shoe”. This version has extra holes and channels to distribute the water routed through the rub plate on the original design.
Not for use on Seam Phantom 2.0

Updated Wheel Axle Assembly
Updated version of the GWAF.
Sold as a kit (1) #215 Brass Axle, (1) #17 Bearing Shim, (1) #216 Screw, and (1) #217 Washer.
Two Axle assemblies required per Seam Phantom
Universal Replacement for ALL Seam Phantoms.