3″ Rapid Z™-DRUM Replacement – Fine
$129.95 (MSRP) AVAILABLE THROUGH A STOCKING DISTRIBUTOR ONLY.
Replacement drum for the 3″ Rapid Z™-DRUM. Vacuum brazed diamond abrasive can be flipped on the arbor to gain extra life.
- Maximum RPM 8500
- Reversible
- Fine Grit (120/150 grit)
Related Products
NEW White Rub Plate Nose – Sink BULL LT
This is a replacement white plastic rub plate for the lower surface of the Sink BULL™LT – THIS IS THE NOSE PORTION ONLY. This kit includes 8 extra attachment screws.
- Fits the NEW Sink BULL™LT
- Does NOT fit the original Sink BULL™
3″ Rapid Z™-CUT Outer Ring
No. 107, Outer bearing ring
Large outer ring used on the Rapid Z™-CUT with new blades
Rapid Z™-CUT Bearing Press
No. 401, Bearing press
This is the press used to install the bearing in the Rapid Z™-CUT bearing replacement video. We offer it here as a convenience.
Click Here to Watch Our Rapid Z™ Bearing Replacement Video!
Sink BULL™LT Complete Kit
**New** Sink BULL™LT
$2695.00 (MSRP) AVAILABLE THROUGH A STOCKING DISTRIBUTOR ONLY.
The Sink BULL™LT is the newest version of our heavy-duty, manual sink milling machine. It utilizes a simple, rigid, powerful design combined with your own inexpensive, shop-made, templates to make CNC quality sink cutouts. The Sink BULL™LT is the only sink milling machine or router-type machine with a long enough base to span a sink template. This means extra stability, no tipping, and a smaller template margin required. The Sink BULL™LT is constructed of heavy-duty anodized aluminum and stainless steel with corrosion-resistant hardware. It’s powered by a large 15 amp Makita grinder – GA7021 or GA7020 (USA), GA7031 (Canada), GA7040S01 (Australia). A strong single lever height adjustment and simple external water feed yield a quality U.S.A. made tool that is “STONE SHOP TOUGH”.
Includes
- Sink BULL™LT base assembly
- 3″ Rapid Z™-CUT with Bearing
- 3″ Rapid Z™-DRUM – COARSE
- 3″ Rapid Z™-DRUM – FINE
- Splash Shield Angle
- All required Hardware
- Custom, multi-function wrench
- GFCI Adapter
- Angel Guard – Cord Connect
- Instruction Manual
- Grinder sold separately
Click Here to Watch Our Sink BULL™LT Video!
3″ Rapid Z™-CUT Replacement Bearing
No. 24, Bearing for Rapid Z™-CUT
Replacement bearing for the Rapid Z™-CUT with template follower
Click Here to Watch Our Rapid Z™ Bearing Replacement Video!
Sink BULL™ Height Adjustment Handle Only
Replacement Sink BULL™ height adjustment handle.
- Fits all Sink BULLs
1″ Rapid Z™-DRUM – Fine
$139.95 (MSRP) AVAILABLE THROUGH A STOCKING DISTRIBUTOR ONLY.
A 1″ diameter vacuum brazed drum wheel, specifically designed for use with the Sink BULL™. This is the bit you need to clean out the tight corner radius on square sinks. Available in two grits with a top bearing to ride along the template. The coarse grit cleans up the extra material left by the Rapid Z™-CUT and the fine grit further smooths the surface leaving it ready to polish. The height matches the Rapid Z™-CUT so height adjustments on the Sink BULL are not required between bits. It is center water feed compatible (note: the Sink BULL™ does not use center water feed).
- Fits 5/8-11 arbor threads (M14 version available)
- Height matched to the Rapid Z™-CUT
- Center water feed compatible
- Maximum RPM 8500
- Fine Grit (120/150 grit)
Rapid Z™-CUT Cap
No. 103, Cap for Rapid Z™-CUT
Retains the blades on the Rapid Z™-CUT