3″ Rapid Z™-CUT Inner Ring
$79.95
No 105, Inner bearing ring
Inner ring that is pressed onto the template follower bearing on a Rapid Z™-CUT
Bearing sold separately
Related Products
Arbor Extension
For use with an Air Polisher on an Original Seam Phantom or Seam Phantom 2.0
Updated Version of our hex Arbor Extension.
- Stainless steel construction
- 1 1/4″ long
- Center water feed compatible
- Standard 5/8-11 internal and external threads
- Made in the U.S.A.
Also available in M14 thread.
White Rub Plate – Original Air and Seam Phantom 2.0
This Rub Plate is used on the Original Air Seam Phantom and is the main rub plate on Seam Phantom 2.0
Hose Assembly
No. 115. Hose assembly for Seam Phantom® & Sink BULL™
Sold as a complete 6′ assembly with a brass threaded male fitting to attach to the valve and a brass female garden hose fitting on the opposite end. All hose assemblies will be supplied with a straight fitting to attach to the valve instead of the old 45 degree fitting.
For use on all Electric Seam Phantoms® that require external water feed plus the Sink BULL™.
Placard Kit
No. 32 & No. 33, Safety Placard Kit
Sold as a kit with (1) #32 Eye Protection placard and (1) #33 GFCI Protection placard
Universal replacement for all Seam Phantoms and Sink BULL.
Arbor Spacer
Arbor Spacer for use with all Electric Seam Phantoms®. Installed between the red snail lock adapter and the grinder to locate the turbo at the most useful position. Works with 5/8-11 or M14 threads.
- 0.19″ thick for all original Seam Phantoms® and most Seam Phantom® 2.0 versions
- 0.32″ thick for Seam Phantom® 2.0 with Metabo grinder ONLY
Bolt
NO. 16, Bolt to attach the Original Seam Phantom Knob, Sold individually
Not for use on Seam Phantom 2.0
Cut Tube Repair Kit
For Original Electric Seam Phantoms with a cut tube. This kit also replaces the grit shield with a larger version to prevent further cutting. The arbor spacer allows for more wear from the SL3 turbos. Note: the current tube is made from an upgraded material and is now red.
Not for use with Seam Phantom 2.0
Kit includes:
(1) Vinyl Tube
(1) Grit Shield
(1) Arbor Spacer (Thickness 0.19 inches)
P-Clip Kit
NO. 5 & No. 6, P-Clip and screw kit
Sold as a kit with (1) #5 P-Clip and (1) #6 screw
Used to attach the rub plate water supply tube to the Original Electric Seam Phantom body.
Not for use on Seam Phantom 2.0