3″ Rapid Z™-DRUM Cap
$24.95
No. 203, Cap for Rapid ZTM-DRUM
Retains the diamond drum on the Rapid ZTM-DRUM
Related Products
Tube Fitting
NO. 20, Tube Fitting, Sold Individually, color may vary
For use on the Original Electric Seam Phantom to connect the rub plate water supply tube to the valve
Not for use on Seam Phantom 2.0
Do You Seam Right? Seam Phantom 2.0 T-Shirt
Do You Seam Right? Seam Phantom 2.0 T-Shirt. All the cool fabricators wear these.
100% Cotton
Cut Tube Repair Kit
For Original Electric Seam Phantoms with a cut tube. This kit also replaces the grit shield with a larger version to prevent further cutting. The arbor spacer allows for more wear from the SL3 turbos. Note: the current tube is made from an upgraded material and is now red.
Not for use with Seam Phantom 2.0
Kit includes:
(1) Vinyl Tube
(1) Grit Shield
(1) Arbor Spacer (Thickness 0.19 inches)
Arbor Spacer
Arbor Spacer for use with all Electric Seam Phantoms®. Installed between the red snail lock adapter and the grinder to locate the turbo at the most useful position. Works with 5/8-11 or M14 threads.
- 0.19″ thick for all original Seam Phantoms® and most Seam Phantom® 2.0 versions
- 0.32″ thick for Seam Phantom® 2.0 with Metabo grinder ONLY
Clip, Washer & Bushing Kit
Replacement Bushings, washers, and E-Clips. The black bushings shown have been repeatedly upgraded to better material and are now burgundy color
**These parts will fit all Original Seam Phantoms and Seam Phantom 2.0**
Kit includes:
(2) #9 Bushings
(1) #8 E-Clip
(1) #41 Heavy Duty E-Clip
(2) #114 Washers
(2) #3 Shim Washers
Arbor Extension
For use with an Air Polisher on an Original Seam Phantom or Seam Phantom 2.0
Updated Version of our hex Arbor Extension.
- Stainless steel construction
- 1 1/4″ long
- Center water feed compatible
- Standard 5/8-11 internal and external threads
- Made in the U.S.A.
Also available in M14 thread.
Rapid Z™-CUT Screws
No. 23, Screws for bearing ring
Sold in a pack of (4) #23 screws
Replacement screws used to attach the large outer bearing ring on a Rapid Z™-CUT
Hose Assembly
No. 115. Hose assembly for Seam Phantom® & Sink BULL™
Sold as a complete 6′ assembly with a brass threaded male fitting to attach to the valve and a brass female garden hose fitting on the opposite end. All hose assemblies will be supplied with a straight fitting to attach to the valve instead of the old 45 degree fitting.
For use on all Electric Seam Phantoms® that require external water feed plus the Sink BULL™.