Showing all 16 results
Sink BULL™LT Complete Kit
**New** Sink BULL™LT
$2695.00 (MSRP) AVAILABLE THROUGH A STOCKING DISTRIBUTOR ONLY.
The Sink BULL™LT is the newest version of our heavy-duty, manual sink milling machine. It utilizes a simple, rigid, powerful design combined with your own inexpensive, shop-made, templates to make CNC quality sink cutouts. The Sink BULL™LT is the only sink milling machine or router-type machine with a long enough base to span a sink template. This means extra stability, no tipping, and a smaller template margin required. The Sink BULL™LT is constructed of heavy-duty anodized aluminum and stainless steel with corrosion-resistant hardware. It’s powered by a large 15 amp Makita grinder – GA7021 or GA7020 (USA), GA7031 (Canada), GA7040S01 (Australia). A strong single lever height adjustment and simple external water feed yield a quality U.S.A. made tool that is “STONE SHOP TOUGH”.
Includes
- Sink BULL™LT base assembly
- 3″ Rapid Z™-CUT with Bearing
- 3″ Rapid Z™-DRUM – COARSE
- 3″ Rapid Z™-DRUM – FINE
- Splash Shield Angle
- All required Hardware
- Custom, multi-function wrench
- GFCI Adapter
- Angel Guard – Cord Connect
- Instruction Manual
- Grinder sold separately
Click Here to Watch Our Sink BULL™LT Video!
3″ Rapid Z™-CUT with Top Bearing
$389.95 (MSRP) AVAILABLE THROUGH A STOCKING DISTRIBUTOR ONLY.
The Rapid Z™-CUT is a 3″ diameter, stacked blade type Z Wheel, specifically designed for use with the Sink BULL™ to shape sink cutouts. It comes with a bearing and ring system designed to ride along a template and help compensate for blade wear. It excels at grinding away stone /quartz quickly but will always leave a small amount to be cleaned up with a drum wheel as the final step. The blades can be rearranged to minimize “apple coring” and they can be replaced easily. It’s center water feed compatible (note: the Sink BULL™ does not use center water feed).
- Fits 5/8-11 arbor threads (M14 version available)
- Center water feed
- Maximum RPM 12,000
- Uses 12 replacement blades
Click Here to Watch Our Sink BULL™ & Rapid Z™ Video!
1″ Rapid Z™-DRUM – Coarse
$139.95 (MSRP) AVAILABLE THROUGH A STOCKING DISTRIBUTOR ONLY.
A 1″ diameter vacuum brazed drum wheel, specifically designed for use with the Sink BULL™. This is the bit you need to clean out the tight corner radius on square sinks. Available in two grits with a top bearing to ride along the template. The coarse grit cleans up the extra material left by the Rapid Z™-CUT and the fine grit further smooths the surface leaving it ready to polish. The height matches the Rapid Z™-CUT so height adjustments on the Sink BULL are not required between bits. It is center water feed compatible (note: the Sink BULL™ does not use center water feed).
- Fits 5/8-11 arbor threads (M14 version available)
- Height matched to the Rapid Z™-CUT
- Center water feed compatible
- Maximum RPM 8500
- Coarse grit (30/40 grit)
1″ Rapid Z™-DRUM – Fine
$139.95 (MSRP) AVAILABLE THROUGH A STOCKING DISTRIBUTOR ONLY.
A 1″ diameter vacuum brazed drum wheel, specifically designed for use with the Sink BULL™. This is the bit you need to clean out the tight corner radius on square sinks. Available in two grits with a top bearing to ride along the template. The coarse grit cleans up the extra material left by the Rapid Z™-CUT and the fine grit further smooths the surface leaving it ready to polish. The height matches the Rapid Z™-CUT so height adjustments on the Sink BULL are not required between bits. It is center water feed compatible (note: the Sink BULL™ does not use center water feed).
- Fits 5/8-11 arbor threads (M14 version available)
- Height matched to the Rapid Z™-CUT
- Center water feed compatible
- Maximum RPM 8500
- Fine Grit (120/150 grit)
3″ Rapid Z™-DRUM – Coarse
$289.95 (MSRP) AVAILABLE THROUGH A STOCKING DISTRIBUTOR ONLY.
A 3″ diameter vacuum brazed drum wheel, specifically designed for use with the Sink BULL™. Available in two grits with a top bearing to ride along the template. The coarse grit cleans up the rough surface left by the Rapid Z™-CUT and the fine grit further smooths the surface leaving it ready to polish. This is the only vacuum brazed drum wheel with reversible and replaceable drums. The height matches the Rapid Z™-CUT so height adjustments on the Sink BULL are not required between bits. It is center water feed compatible (note: the Sink BULL™ does not use center water feed).
- Fits 5/8-11 arbor threads (M14 version available)
- Reversible, and replaceable diamond abrasive drum
- Height matched to the Rapid Z™-CUT
- Center water feed compatible
- Maximum RPM 8500
- Coarse grit = approximately 30/40 grit
- Fine Grit = approximately 120/150 grit
3″ Rapid Z™-DRUM – Fine
$289.95 (MSRP) AVAILABLE THROUGH A STOCKING DISTRIBUTOR ONLY.
A 3″ diameter vacuum brazed drum wheel, specifically designed for use with the Sink BULL™. Available in two grits with a top bearing to ride along the template. The coarse grit cleans up the rough surface left by the Rapid Z™-CUT and the fine grit further smooths the surface leaving it ready to polish. This is the only vacuum brazed drum wheel with reversible and replaceable drums. The height matches the Rapid Z™-CUT so height adjustments on the Sink BULL are not required between bits. It is center water feed compatible (note: the Sink BULL™ does not use center water feed).
- Fits 5/8-11 arbor threads (M14 version available)
- Reversible, and replaceable diamond abrasive drum
- Height matched to the Rapid Z™-CUT
- Center water feed compatible
- Maximum RPM 8500
- Coarse grit = approximately 30/40 grit
- Fine Grit = approximately 120/150 grit
3″ Rapid Z™-CUT Replacement Blades
$9.45 (MSRP) AVAILABLE THROUGH A STOCKING DISTRIBUTOR ONLY.
Replacement blade for the Rapid Z™-CUT. Watch our video below on how to change the blades.
- 3″ diameter x .08 thick x 7/8 arbor hole
- Maximum RPM 12,000
- Price listed is for one blade
- Rapid Z™-CUT WITH TEMPLATE BEARING uses 12 replacement blades
- Rapid Z™-CUT NO BEARING uses 17 replacement blades
Click Here to Watch Our Rapid Z™ Blade Replacement Video!
3″ Rapid Z™-DRUM Replacement – Coarse
$129.95 (MSRP) AVAILABLE THROUGH A STOCKING DISTRIBUTOR ONLY.
Replacement drum for the 3″ Rapid Z™-DRUM. Vacuum brazed diamond abrasive can be flipped on the arbor to gain extra life.
- Maximum RPM 8500
- Reversible
- Coarse Grit (30/40 grit)
3″ Rapid Z™-DRUM Replacement – Fine
$129.95 (MSRP) AVAILABLE THROUGH A STOCKING DISTRIBUTOR ONLY.
Replacement drum for the 3″ Rapid Z™-DRUM. Vacuum brazed diamond abrasive can be flipped on the arbor to gain extra life.
- Maximum RPM 8500
- Reversible
- Fine Grit (120/150 grit)
3″ Rapid Z™-CUT without Bearing
$259.95 (MSRP) AVAILABLE THROUGH A STOCKING DISTRIBUTOR ONLY.
The Rapid Z™-CUT without a bearing is used for fast free-hand shaping or can be adapted for CNC use. The blades can be rearranged to minimize “apple coring” and they can be replaced easily. It’s also center water feed compatible.
- Fits 5/8-11 arbor threads (M14 version available)
- Center water feed
- Maximum RPM 12,000
- Uses 17 replacement blades
Click Here to Watch Our Sink BULL™ & Rapid Z™ Video!
Multi-Function Wrench – Sink BULL LT
This Multi-Function Wrench is designed for use with The Sink BULL™LT. The Wrench fits all 3″ and 1″ Rapid-Z Abrasives. It is also used as a gauge block to set the initial grinding height on the Sink BULL™LT.
NEW White Rub Plate Nose – Sink BULL LT
This is a replacement white plastic rub plate for the lower surface of the Sink BULL™LT – THIS IS THE NOSE PORTION ONLY. This kit includes 8 extra attachment screws.
- Fits the NEW Sink BULL™LT
- Does NOT fit the original Sink BULL™
White Rub Plate – Original Sink BULL™
This is a replacement white plastic rub plate for the lower surface of the original Sink BULL™. This kit includes 6 extra attachment screws.
- Fits the original Sink BULL™
- Does NOT fit the New Sink BULL™LT
Sink BULL™ – UPGRADED Replacement Grips
Tired of your Sink BULL™ grips sliding around on the bar? We were too!!! After trying every type of grip adhesive we could find, we just sourced better grips. We’ve been using them for a couple years and our fabricators love them. These upgraded replacement grips have the extra screw length required to fit the original Sink BULL™.
- Sold as a pair
- Fits the Original Sink BULL™
- Does NOT fit the New Sink BULL™LT
Sink BULL™ Height Adjustment Handle Kit
Replacement Sink BULL™ height adjustment handle includes bolt and washer.
- Fits all Sink BULLs
- Sold as a kit
Sink BULL™ Height Adjustment Handle Only
Replacement Sink BULL™ height adjustment handle.
- Fits all Sink BULLs