Glide Guide, 92″
$335.00
92″ Glide Guide Rail for use with the ORIGINAL Seam Phantom. Can be used to produce seams up to 86″ long. This was our preferred guide rail design for over a decade. Also available in 48″ and 72″
*Note: Does not work with Seam Phantom 2.0
*Note: This item is considered “oversize” by FedEx. The shipping cost will include additional fees for “oversize” and handling.
Related Products
SL3® 3 Inch Rigid Turbo Abrasive, 150 Grit
3″, rigid backed, turbo abrasive
- 150 grit – Popular replacement turbo for the Seam Phantom®
- Wet use only
- 3 1/8″ actual outside diameter
- Locks into the SL3® Snail Lock Adapter
- Maximum RPM 4000
Screws
No. 1, Screws (#10 x 1/2″ Stainless Button Head Screws)
Sold in a pack of 10 screws
Multiple uses:
- Attaches the white rub plate and valve bracket on the original Seam Phantom®.
- Attaches the white rub plates, valve bracket and spray shield on Seam Phantom® 2.0
- Attaches the white rub plate, brackets and P-clips on the Original Sink BULL™
- Buy multiple packs if you require more than 10 screws.
- Does NOT fit Sink BULL™ LT
No. 310, Screws (#10 x 3/8″ Stainless Button Head Screws)
Sold in a pack of 10 screws
- Attaches the white rub plate, brackets and P-clips on the Sink BULL™ LT
- Buy multiple packs if you require more than 10 screws.
- Does NOT fit the Original Sink BULL™ or Seam Phantom Models
Glide Guide, 72″
72″ Glide Guide Rail for use with the ORIGINAL Seam Phantom. Can be used to produce seams up to 66″ long. This was our preferred guide rail design for over a decade. Also available in 48″ and 92″
*Note: Does not work with Seam Phantom 2.0
*Note: This item is considered “oversize” by FedEx. The shipping cost will include additional fees for “oversize” and handling.
Valve Bracket Assembly
NO LONGER AVAILABLE
No. 117, SOLD AS AN ASSEMBLY, INCLUDES 2 SET SCREWS #19
Set Screws
NO. 122, Set screws.
Sold as a pack of (5) #122 set screws
Fits #121 air polisher adapter (red orientation dot on top) on a Seam Phantom (air version). Previous air adapters (white orientation dot on top) used a smaller set screw. Call for availability of the smaller screw.
Hose Assembly
No. 115. Hose assembly for Seam Phantom® & Sink BULL™
Sold as a complete 6′ assembly with a brass threaded male fitting to attach to the valve and a brass female garden hose fitting on the opposite end. All hose assemblies will be supplied with a straight fitting to attach to the valve instead of the old 45 degree fitting.
For use on all Electric Seam Phantoms® that require external water feed plus the Sink BULL™.
Electric to Air Kit
This kit allows you to convert your Original Electric Seam Phantom® to use an air polisher. It comes with Air Adapter, # 121 (complete with all required set screws), and Stainless Steel Arbor Extension, #123, with 5/8-11 thread.
These parts are also compatible with Seam Phantom 2.0 but additional parts may be required to complete a conversion depending on the starting configuration.
The air adapter fits polishers with a maximum nose diameter of 2.125″, (Click Here for Image).
Also available in M14 thread. Please call the office to order a kit with M14 thread.
Click Here to Watch Our Electric to Air Conversion Kit Video!
Metric Screw and Shim Washer Kits
SCREW KIT 27 – Contains (4) #27 screws and (4) #31 shim washers. These screws are used to attach the Original Seam Phantom to a Makita Grinder or air polisher adapter. The shim washers are used to fine-tune the grinding angle.
SCREW KIT 327 – Contains (4) #327 screws and (4) #31 shim washers. These are the longer screws used to attach a modified Seam Phantom to a Makita Center Water Polisher (PW5001C) through an adapter. The shim washers are used to fine-tune the grinding angle.
Neither of these kits is used for Seam Phantom 2.0