Screws 
Metric Screw and Shim Washer
$8.65
No. 27 & No. 31, Original Seam Phantom attachment screws
Sold as a kit with (4) #27 screws and (4) #31 shim washers
Screws used to attach the Original Seam Phantom to a Makita Grinder or air polisher adapter, and Shim washers used to fine-tune the grinding angle
Not for use with Seam Phantom 2.0
Related Products
SL3® Cup Wheel – 2 Inch
2″ cup Wheel for use with the Electric or Air Seam Phantom to create the undercut or back bevel.
- Locks into the SL3® Snail Lock Adapter
- Maximum RPM 10,000
*Updated* Spray Shield
No. 105. Stainless steel spray shield for the Original Electric Seam Phantom® . This replaces the old black aluminum spray shield.
Not for use on Seam Phantom 2.0.
SL3® 3 Inch Rigid Turbo Abrasive, 60 Grit
3″, rigid backed, turbo abrasive
- 60 grit – Popular replacement turbo for the Seam Phantom®
- Wet use only
- 3 1/8″ actual outside diameter
- Locks into the SL3® Snail Lock Adapter
- Maximum RPM 4000
P-Clip Kit
NO. 5 & No. 6, P-Clip and screw kit
Sold as a kit with (1) #5 P-Clip and (1) #6 screw
Used to attach the rub plate water supply tube to the Original Electric Seam Phantom body.
Not for use on Seam Phantom 2.0
Adjustment Screw Replacement Kit
Adjustment Screw Replacement Kit – Upgrade for Original Seam Phantoms S/N 0001-0199. Replacement Part for S/N 0200 and higher.
This is a more durable Adjustment Screw assembly that is standard on S/N 0200 and higher. It can be easily retrofitted on S/N 0001-0199. Also updated in 2014 to include stronger e-clips and different shim washers.
**This Adjustment Screw fits all Original Air and Original Electric Seam Phantoms**
Not compatible with the Original Center Water Feed Electric Seam Phantom
Not compatible with Seam Phantom 2.0
Kit includes:
(1) #113 Adjustment Screw with Knob
(1) #8 E-Clip
(1) #41 Heavy Duty E-Clip
(2) #114 Washers
(2) #3 Shim Washers
Gauge Blocks, Pair, Replacement
Used with the Original Seam Phantom to set the proper offset distance before clamping the Glide Guide. Supplied as a pair with the Original Seam Phantom® package.
Not for use with Seam Phantom 2.0 or Ultra Guide
Ultra Guide, 46″
Designed from the ground-up for use with the Seam Phantom® 2.0. This guide provides next-level accuracy when producing superior seams in stone slab material.
This is the guide provided with every new Seam Phantom® 2.0
*Note: This guide will not work with the original Seam Phantom unless you change out the wheels
Hose Assembly
No. 115. Hose assembly for Seam Phantom
Sold as a complete 6′ assembly with a brass threaded male fitting to attach to the valve and a brass female garden hose fitting on the opposite end. All hose assemblies will be supplied with a straight fitting to attach to the valve instead of the old 45 degree fitting.
For use on all Electric Seam Phantoms that require external water feed.