3" Rapid Z™-DRUM Arbor Key 
3″ Rapid Z™-CUT with Top Bearing
$389.95
The Rapid Z™-CUT is a 3″ diameter, stacked blade type Z Wheel, specifically designed for use with the Sink BULL™ to shape sink cutouts. It comes with a bearing and ring system designed to ride along a template and help compensate for blade wear. It excels at grinding away stone /quartz quickly but will always leave a small amount to be cleaned up with a drum wheel as the final step. The blades can be rearranged to minimize “apple coring” and they can be replaced easily. It’s center water feed compatible (note: the Sink BULL™ does not use center water feed).
- Fits 5/8-11 arbor threads (M14 version available)
- Center water feed
- Maximum RPM 12,000
- Uses 12 replacement blades
Click Here to Watch Our Sink BULL™ & Rapid Z™ Video!
Related Products
1″ Rapid Z™-DRUM – Fine
A 1″ diameter vacuum brazed drum wheel, specifically designed for use with the Sink BULL™. This is the bit you need to clean out the tight corner radius on square sinks. Available in two grits with a top bearing to ride along the template. The coarse grit cleans up the extra material left by the Rapid Z™-CUT and the fine grit further smooths the surface leaving it ready to polish. The height matches the Rapid Z™-CUT so height adjustments on the Sink BULL are not required between bits. It is center water feed compatible (note: the Sink BULL™ does not use center water feed).
- Fits 5/8-11 arbor threads (M14 version available)
- Height matched to the Rapid Z™-CUT
- Center water feed compatible
- Maximum RPM 8500
- Fine Grit (120/150 grit)
Multi-Function Wrench – Sink BULL LT
This Multi-Function Wrench is designed for use with The Sink BULL™LT. The Wrench fits all 3″ and 1″ Rapid-Z Abrasives. It is also used as a gauge block to set the initial grinding height on the Sink BULL™LT.
3″ Rapid Z™-CUT Replacement Bearing
No. 24, Bearing for Rapid Z™-CUT
Replacement bearing for the Rapid Z™-CUT with template follower
Click Here to Watch Our Rapid Z™ Bearing Replacement Video!
Rapid Z™-CUT Screws
No. 23, Screws for bearing ring
Sold in a pack of (4) #23 screws
Replacement screws used to attach the large outer bearing ring on a Rapid Z™-CUT
1″ Rapid Z™-DRUM – Coarse
A 1″ diameter vacuum brazed drum wheel, specifically designed for use with the Sink BULL™. This is the bit you need to clean out the tight corner radius on square sinks. Available in two grits with a top bearing to ride along the template. The coarse grit cleans up the extra material left by the Rapid Z™-CUT and the fine grit further smooths the surface leaving it ready to polish. The height matches the Rapid Z™-CUT so height adjustments on the Sink BULL are not required between bits. It is center water feed compatible (note: the Sink BULL™ does not use center water feed).
- Fits 5/8-11 arbor threads (M14 version available)
- Height matched to the Rapid Z™-CUT
- Center water feed compatible
- Maximum RPM 8500
- Coarse grit (30/40 grit)
Sink BULL™LT Complete Kit
**New** Sink BULL™LT
The Sink BULL™LT is the newest version of our heavy-duty, manual sink milling machine. It utilizes a simple, rigid, powerful design combined with your own inexpensive, shop-made, templates to make CNC quality sink cutouts. The Sink BULL™LT is the only sink milling machine or router-type machine with a long enough base to span a sink template. This means extra stability, no tipping, and a smaller template margin required. The Sink BULL™LT is constructed of heavy-duty anodized aluminum and stainless steel with corrosion-resistant hardware. It’s powered by a large 15 amp Makita grinder – GA7021 or GA7020 (USA), GA7031 (Canada), GA7040S01 (Australia). A strong single lever height adjustment and simple external water feed yield a quality U.S.A. made tool that is “STONE SHOP TOUGH”.
Includes
- Sink BULL™LT base assembly
- 3″ Rapid Z™-CUT with Bearing
- 3″ Rapid Z™-DRUM – COARSE
- 3″ Rapid Z™-DRUM – FINE
- Splash Shield Angle
- All required Hardware
- Custom, multi-function wrench
- GFCI Adapter
- Angel Guard – Cord Connect
- Instruction Manual
- Grinder sold separately
Click Here to Watch Our Sink BULL™LT Video!
Rapid Z™-CUT Blade Spacer
No. 111, Blade spacer, Sold Individually
This is the spacer between the blades on a Rapid Z™-CUT
13 required for the Rapid Z™-CUT with top bearing
17 required for the Rapid Z™-CUT NO bearing
NEW White Rub Plate Nose – Sink BULL LT
This is a replacement white plastic rub plate for the lower surface of the Sink BULL™LT – THIS IS THE NOSE PORTION ONLY. This kit includes 8 extra attachment screws.
- Fits the NEW Sink BULL™LT
- Does NOT fit the original Sink BULL™