Showing 101–125 of 125 results
Tube Fitting
NO. 20, Tube Fitting, Sold Individually, color may vary
For use on the Original Electric Seam Phantom to connect the rub plate water supply tube to the valve
Not for use on Seam Phantom 2.0
UPDATED Valve Bracket
Updated version of No. 117, sold individually. This is the bracket only, does not include valve, elbow fitting, or attachment screws.
For use on all Electric Seam Phantoms that require external water feed.
Purchase VALVE221 for use with this Bracket. Watch the video below for more info.
.
.
Valve Bracket Assembly
NO LONGER AVAILABLE
No. 117, SOLD AS AN ASSEMBLY, INCLUDES 2 SET SCREWS #19
Wheel Axle Assembly
NO LONGER AVAILABLE
NO. 15, 17, 18. Sold as a kit with (1) #15 wheel axles, (1) #17 bearing shims, and (1) #18 lock nuts.
3″ Rapid Z™-CUT Inner Ring
No 105, Inner bearing ring
Inner ring that is pressed onto the template follower bearing on a Rapid Z™-CUT
Bearing sold separately
3″ Rapid Z™-CUT Outer Ring
No. 107, Outer bearing ring
Large outer ring used on the Rapid Z™-CUT with new blades
Rapid Z-CUT Screws Sold Separately.
3″ Rapid Z™-CUT Replacement Bearing
No. 24, Bearing for Rapid Z™-CUT
Replacement bearing for the Rapid Z™-CUT with template follower
Click Here to Watch Our Rapid Z™ Bearing Replacement Video!
3″ Rapid Z™-DRUM Arbor Key
No. 240, Key
Replacement key for the 3″ Rapid ZTM-DRUM
3″ Rapid Z™-DRUM Cap
No. 203, Cap for Rapid ZTM-DRUM
Retains the diamond drum on the Rapid ZTM-DRUM
3″ Rapid Z™-DRUM Replacement Bearing
No. 230, Replacement Bearing for 3″ Rapid ZTM-DRUM
Ball Valve
NO LONGER AVAILABLE
N0. 116, Ball valve for the Original Electric Seam Phantom, Sold individually.
Bolt
NO. 16, Bolt to attach the Original Seam Phantom Knob, Sold individually
Not for use on Seam Phantom 2.0
Air Adapter
Allows the mounting of an Air Polisher on a Seam Phantom®. Fits polishers with a maximum nose diameter of 2.125″, (Click Here for Image).
Includes Air Adapter part #121 and Set Screws #122.
This plus the Arbor Extension is all that is needed to convert an Original Electric Seam Phantom to Air.
Also compatible with Seam Phantom 2.0.
White Rub Plate – Original Sink BULL™
This is a replacement white plastic rub plate for the lower surface of the original Sink BULL™. This kit includes 6 extra attachment screws.
- Fits the original Sink BULL™
- Does NOT fit the New Sink BULL™LT
Seam Phantom 2.0 DLX Trigger Kit
Replacement Trigger Kit for the Seam Phantom 2.0 DLX
We have upgraded to a new, stronger, carbon fiber-reinforced black trigger for strength and durability. The Red Trigger is no longer available.
Both triggers are interchangeable.
- Includes both Pivot Pins and E-Clips
- Block the spring-loaded side open to release tension on the trigger before replacement
Sink BULL™ – Replacement Grips
Replacement Grip Sets for all Sink BULLs™. These will replace the older, bicycle style, grip on the ORIGINAL Sink BULL as well as the newer Sink BULL™ LT.
- USA made grip
- Sold as a pair complete with hardware
- Longer Screw for Original Sink BULL
- Shorter Screw for Sink BULL LT
Sink BULL™ Height Adjustment Handle Kit
Replacement Sink BULL™ height adjustment handle includes bolt and washer.
- Universal replacement for Sink BULL and Sink BULL LT
- Sold as a kit
Sink BULL™ Height Adjustment Handle Only
Replacement Sink BULL™ height adjustment handle.
- Universal replacement for Sink BULL and Sink BULL LT
Arbor Extension
For use with an Air Polisher on an Original Seam Phantom or Seam Phantom 2.0
Updated Version of our hex Arbor Extension.
- Stainless steel construction
- 1 1/4″ long
- Center water feed compatible
- Standard 5/8-11 internal and external threads
- Made in the U.S.A.
Also available in M14 thread.
Arbor Extension (M14 Version)
For use with an Air Polisher on an Original Seam Phantom or Seam Phantom 2.0
- Stainless steel construction
- 1 1/4″ long
- Center water feed compatible
- M14 internal and external threads
- Made in the U.S.A.
Also available in 5-8/11 Thread.
Spray Skirt for Makita Grinder
Intended for the Original Electric Seam Phantom this spray skirt helps keep the water out of your Makita! Ensure your spray skirt is wrapped tight to the Makita to get the best protection.
Not for use with Seam Phantom 2.0
Adjustment Nut
Replacement adjustment nut for the Seam Phantom®.
- Solid brass nut for all Original Seam Phantoms®
- Anti-rattle red plastic with brass insert for all Seam Phantom® 2.0
Arbor Spacer
Arbor Spacer for use with all Electric Seam Phantoms®. Installed between the red snail lock adapter and the grinder to locate the turbo at the most useful position. Works with 5/8-11 or M14 threads.
- 0.19″ thick for all original Seam Phantoms® and most Seam Phantom® 2.0 versions
- 0.32″ thick for Seam Phantom® 2.0 with Metabo grinder ONLY
Cut Tube Repair Kit
For Original Electric Seam Phantoms with a cut tube. This kit also replaces the grit shield with a larger version to prevent further cutting. The arbor spacer allows for more wear from the SL3 turbos. Note: the current tube is made from an upgraded material and is now red.
Not for use with Seam Phantom 2.0
Kit includes:
(1) Vinyl Tube
(1) Grit Shield
(1) Arbor Spacer (Thickness 0.19 inches)
Clip, Washer & Bushing Kit
Replacement Bushings, washers, and E-Clips. The black bushings shown have been repeatedly upgraded to better material and are now burgundy color
**These parts will fit all Original Seam Phantoms and Seam Phantom 2.0**
Kit includes:
(2) #9 Bushings
(1) #8 E-Clip
(1) #41 Heavy Duty E-Clip
(2) #114 Washers
(2) #3 Shim Washers