UPDATED Ball Valve
$26.95
Updated version of N0. 116, ball valve, Sold individually.
For use on all Electric Seam Phantoms® that require external water feed and the Sink BULL™
**Now with ZINC Handle**
Purchase BRACKET220 for use with this valve on the Seam Phantom. Watch the video below for more info.
.
.
Related Products
Updated Wheel Axle Assembly
Updated version of the GWAF.
Sold as a kit (1) #215 Brass Axle, (1) #17 Bearing Shim, (1) #216 Screw, and (1) #217 Washer.
Two Axle assemblies required per Seam Phantom
Universal Replacement for ALL Seam Phantoms.
Metric Screw and Shim Washer Kits
SCREW KIT 27 – Contains (4) #27 screws and (4) #31 shim washers. These screws are used to attach the Original Seam Phantom to a Makita Grinder or air polisher adapter. The shim washers are used to fine-tune the grinding angle.
SCREW KIT 327 – Contains (4) #327 screws and (4) #31 shim washers. These are the longer screws used to attach a modified Seam Phantom to a Makita Center Water Polisher (PW5001C) through an adapter. The shim washers are used to fine-tune the grinding angle.
Neither of these kits is used for Seam Phantom 2.0
Set Screws
NO. 19. Sold in a pack of 2.
Set Screws for the original black valve bracket used on the original electric Seam Phantoms®
Not for use on Seam Phantom 2.0
Glide Guide, 48″
*Note: Does not work with Seam Phantom 2.0
SL3® 3 Inch Rigid Turbo Abrasive, 150 Grit
3″, rigid backed, turbo abrasive
- 150 grit – Popular replacement turbo for the Seam Phantom®
- Wet use only
- 3 1/8″ actual outside diameter
- Locks into the SL3® Snail Lock Adapter
- Maximum RPM 4000
Gauge Blocks, Pair, Replacement
Used with the Seam Phantom to set the proper offset distance before clamping the Guide. Supplied as a pair with all Seam Phantom® packages
- Silver aluminum version for all Original Seam Phantoms® and the Glide Guide
- Red plastic version for Seam Phantom® 2.0 and the Ultra Guide
Placard Kit
No. 32 & No. 33, Safety Placard Kit
Sold as a kit with (1) #32 Eye Protection placard and (1) #33 GFCI Protection placard
Universal replacement for all Seam Phantoms and Sink BULL.
Glide Guide, 72″
72″ Glide Guide Rail for use with the ORIGINAL Seam Phantom. Can be used to produce seams up to 66″ long. This was our preferred guide rail design for over a decade. Also available in 48″ and 92″
*Note: Does not work with Seam Phantom 2.0
*Note: This item is considered “oversize” by FedEx. The shipping cost will include additional fees for “oversize” and handling.