Glide Guide, 72″
$265.00
72″ Glide Guide Rail for use with the ORIGINAL Seam Phantom. Can be used to produce seams up to 66″ long. This was our preferred guide rail design for over a decade. Also available in 48″ and 92″
*Note: Does not work with Seam Phantom 2.0
*Note: This item is considered “oversize” by FedEx. The shipping cost will include additional fees for “oversize” and handling.
Related Products
Gauge Blocks, Pair, Replacement
Used with the Seam Phantom to set the proper offset distance before clamping the Guide. Supplied as a pair with all Seam Phantom® packages
- Silver aluminum version for all Original Seam Phantoms® and the Glide Guide
- Red plastic version for Seam Phantom® 2.0 and the Ultra Guide
Screws
No. 1, Screws (#10 x 1/2″ Stainless Button Head Screws)
Sold in a pack of 10 screws
Multiple uses:
- Attaches the white rub plate and valve bracket on the original Seam Phantom®.
- Attaches the white rub plates, valve bracket and spray shield on Seam Phantom® 2.0
- Attaches the white rub plate, brackets and P-clips on the Original Sink BULL™
- Buy multiple packs if you require more than 10 screws.
- Does NOT fit Sink BULL™ LT
No. 310, Screws (#10 x 3/8″ Stainless Button Head Screws)
Sold in a pack of 10 screws
- Attaches the white rub plate, brackets and P-clips on the Sink BULL™ LT
- Buy multiple packs if you require more than 10 screws.
- Does NOT fit the Original Sink BULL™ or Seam Phantom Models
Arbor Spacer
Arbor Spacer for use with all Electric Seam Phantoms®. Installed between the red snail lock adapter and the grinder to locate the turbo at the most useful position. Works with 5/8-11 or M14 threads.
- 0.19″ thick for all original Seam Phantoms® and most Seam Phantom® 2.0 versions
- 0.32″ thick for Seam Phantom® 2.0 with Metabo grinder ONLY
Adjustment Nut
Replacement adjustment nut for the Seam Phantom®.
- Solid brass nut for all Original Seam Phantoms®
- Anti-rattle red plastic with brass insert for all Seam Phantom® 2.0
Tube Fitting
NO. 20, Tube Fitting, Sold Individually, color may vary
For use on the Original Electric Seam Phantom to connect the rub plate water supply tube to the valve
Not for use on Seam Phantom 2.0
Hose Assembly
No. 115. Hose assembly for Seam Phantom® & Sink BULL™
Sold as a complete 6′ assembly with a brass threaded male fitting to attach to the valve and a brass female garden hose fitting on the opposite end. All hose assemblies will be supplied with a straight fitting to attach to the valve instead of the old 45 degree fitting.
For use on all Electric Seam Phantoms® that require external water feed plus the Sink BULL™.
Updated Wheel Axle Assembly
Updated version of the GWAF.
Sold as a kit (1) #215 Brass Axle, (1) #17 Bearing Shim, (1) #216 Screw, and (1) #217 Washer.
Two Axle assemblies required per Seam Phantom
Universal Replacement for ALL Seam Phantoms.
SL3® Cup Wheel – 2 Inch
2″ cup Wheel for use with the Electric or Air Seam Phantom to create the undercut or back bevel.
- Locks into the SL3® Snail Lock Adapter
- Maximum RPM 10,000