White Rub Plate – Electric
$65.95
This rub plate is used with the Original Electric Seam Phantom. Also known as “The Shoe”. This version has extra holes and channels to distribute the water routed through the rub plate on the original design.
Not for use on Seam Phantom 2.0
Related Products
SL3® 3 Inch Rigid Turbo Abrasive, 60 Grit
3″, rigid backed, turbo abrasive
- 60 grit – Popular replacement turbo for the Seam Phantom®
- Wet use only
- 3 1/8″ actual outside diameter
- Locks into the SL3® Snail Lock Adapter
- Maximum RPM 4000
Updated Wheel Axle Assembly
Updated version of the GWAF.
Sold as a kit (1) #215 Brass Axle, (1) #17 Bearing Shim, (1) #216 Screw, and (1) #217 Washer.
Two Axle assemblies required per Seam Phantom
Universal Replacement for ALL Seam Phantoms.
Metric Screw and Shim Washer Kits
SCREW KIT 27 – Contains (4) #27 screws and (4) #31 shim washers. These screws are used to attach the Original Seam Phantom to a Makita Grinder or air polisher adapter. The shim washers are used to fine-tune the grinding angle.
SCREW KIT 327 – Contains (4) #327 screws and (4) #31 shim washers. These are the longer screws used to attach a modified Seam Phantom to a Makita Center Water Polisher (PW5001C) through an adapter. The shim washers are used to fine-tune the grinding angle.
Neither of these kits is used for Seam Phantom 2.0
Arbor Extension (M14 Version)
For use with an Air Polisher on an Original Seam Phantom or Seam Phantom 2.0
- Stainless steel construction
- 1 1/4″ long
- Center water feed compatible
- M14 internal and external threads
- Made in the U.S.A.
Also available in 5-8/11 Thread.
Tube Fitting
NO. 20, Tube Fitting, Sold Individually, color may vary
For use on the Original Electric Seam Phantom to connect the rub plate water supply tube to the valve
Not for use on Seam Phantom 2.0
Placard Kit
No. 32 & No. 33, Safety Placard Kit
Sold as a kit with (1) #32 Eye Protection placard and (1) #33 GFCI Protection placard
Universal replacement for all Seam Phantoms and Sink BULL.
Hose Assembly
No. 115. Hose assembly for Seam Phantom® & Sink BULL™
Sold as a complete 6′ assembly with a brass threaded male fitting to attach to the valve and a brass female garden hose fitting on the opposite end. All hose assemblies will be supplied with a straight fitting to attach to the valve instead of the old 45 degree fitting.
For use on all Electric Seam Phantoms® that require external water feed plus the Sink BULL™.
Set Screws
NO. 122, Set screws.
Sold as a pack of (5) #122 set screws
Fits #121 air polisher adapter (red orientation dot on top) on a Seam Phantom (air version). Previous air adapters (white orientation dot on top) used a smaller set screw. Call for availability of the smaller screw.