Gauge Blocks, Pair, Replacement
$42.15
Used with the Original Seam Phantom to set the proper offset distance before clamping the Glide Guide. Supplied as a pair with the Original Seam Phantom® package.
Not for use with Seam Phantom 2.0 or Ultra Guide
Related Products
Metric Screw and Shim Washer
No. 27 & No. 31, Original Seam Phantom attachment screws
Sold as a kit with (4) #27 screws and (4) #31 shim washers
Screws used to attach the Original Seam Phantom to a Makita Grinder or air polisher adapter, and Shim washers used to fine-tune the grinding angle
Not for use with Seam Phantom 2.0
Valve Bracket Assembly
NO LONGER AVAILABLE
No. 117, SOLD AS AN ASSEMBLY, INCLUDES 2 SET SCREWS #19
Ultra Guide, 46″
Designed from the ground-up for use with the Seam Phantom® 2.0. This guide provides next-level accuracy when producing superior seams in stone slab material.
This is the guide provided with every new Seam Phantom® 2.0
*Note: This guide will not work with the original Seam Phantom unless you change out the wheels
Glide Guide, 72″
72″ Glide Guide Rail for use with the ORIGINAL Seam Phantom. Can be used to produce seams up to 66″ long. This was our preferred guide rail design for over a decade. Also available in 48″ and 92″
*Note: Does not work with Seam Phantom 2.0
*Note: This item is considered “oversize” by FedEx. The shipping cost will include additional fees for “oversize” and handling.
SL3® Snail Lock Adapter (M14 Version)
- Fits M14 Threads
- Balanced to eliminate vibration
- Snail lock attachment grips all SL3® components
Also available in 5/8-11 thread.
SL3® 3 Inch Rigid Turbo Abrasive, 60 Grit
3″, rigid backed, turbo abrasive
- 60 grit – Popular replacement turbo for the Seam Phantom®
- Wet use only
- 3 1/8″ actual outside diameter
- Locks into the SL3® Snail Lock Adapter
- Maximum RPM 4000
Adjustment Screw Replacement Kit
Adjustment Screw Replacement Kit – Upgrade for Original Seam Phantoms S/N 0001-0199. Replacement Part for S/N 0200 and higher.
This is a more durable Adjustment Screw assembly that is standard on S/N 0200 and higher. It can be easily retrofitted on S/N 0001-0199. Also updated in 2014 to include stronger e-clips and different shim washers.
**This Adjustment Screw fits all Original Air and Original Electric Seam Phantoms**
Not compatible with the Original Center Water Feed Electric Seam Phantom
Not compatible with Seam Phantom 2.0
Kit includes:
(1) #113 Adjustment Screw with Knob
(1) #8 E-Clip
(1) #41 Heavy Duty E-Clip
(2) #114 Washers
(2) #3 Shim Washers
*Updated* Spray Shield
No. 105. Stainless steel spray shield for the Original Electric Seam Phantom® . This replaces the old black aluminum spray shield.
Not for use on Seam Phantom 2.0.