Arbor Spacer
$8.85
Arbor Spacer for use with Electric Seam Phantom®. Installed between the SL3 5/8 adapter and the Makita polisher, it helps ensure the SL3 turbos can be used completely.
Arbor Spacer for use on Electric Seam.
Arbor Spacer Thickness 0.19 inches.
Related Products
Seam Phantom® Original Electric Package
ORIGINAL SEAM PHANTOM NO LONGER AVAILABLE
SEAM PHANTOM 2.0 AVAILABLE FROM A DISTRIBUTOR NOW
$1,825.00 (MAP)
The Seam Phantom® is an innovative system for producing near-perfect seams in all types of stone and quartz. The system utilizes a diamond cup wheel followed by up to three diamond abrasives and a precise depth adjustment to eliminate chips and produce a clean sharp edge. The rigid design and Glide Guide straight edge keep each half of the seam straight and true. When the counter is assembled you can produce a nearly invisible seam.
Dress Flawless seams in 15-20 minutes. The original Electric Seam Phantom® is designed to fit onto any of the following Makita grinders: 9564CV, 9565CV (USA), GA5042C, GA4542C (USA/Canada), GA5040C, GA4540C (U.K), 9565CVR (Africa). Made in the U.S.A. Grinder sold separately.
Kit Includes:
- Seam Phantom®
- 48″ Glide Guide Rail (72″/92″ Sold Separately)
- Upgraded Tool Box (February 2019)
- GFCI Adapter
- SL3 Adapter(Also Available in M14 Thread)
- 60 Grit SL3 Rigid Turbo
- 150 Grit SL3 Rigid Turbo
- 300 Grit SL3 Rigid Turbo
- 2″ SL3 Cup Wheel
- 2 C-Clamps (For clamping Glide Guide)
- 2 Gauge Blocks
- Spray Skirt for Grinder
- Splash Guard Angle
- Angle Adjustment Washers
- All Required Hardware
- Instruction Manual
- Grinder sold separately
Seam Phantom® Air Package
ORIGINAL SEAM PHANTOM NO LONGER AVAILABLE
SEAM PHANTOM 2.0 AVAILABLE FROM A DISTRIBUTOR NOW
$1,695.00 (MAP)
The Seam Phantom® is an innovative system for producing near-perfect seams in all types of stone and quartz. The system utilizes a diamond cup wheel followed by up to three diamond abrasives and a precise depth adjustment to eliminate chips and produce a clean sharp edge. The rigid design and Glide Guide straight edge keep each half of the seam straight and true. When the counter is assembled you can produce a nearly invisible seam.
Dress Flawless seams in 15-20 minutes. The Air Seam Phantom® is designed to be compatible with multiple types of Air Polishers with a maximum polisher nose diameter of 2.125″.
Made in the U.S.A.
Polisher sold separately.
Kit Includes:
- Seam Phantom®
- Adapter for Air Tool
- Arbor Extension (Also Available in M14 Thread)
- 48″ Glide Guide Rail (72″/92″ Sold Separately)
- SL3 Adapter (Also Available in M14 Thread)
- 60 Grit SL3 Rigid Turbo
- 150 Grit SL3 Rigid Turbo
- 300 Grit SL3 Rigid Turbo
- 2″ SL3 Cup Wheel
- 2 C-Clamps (For clamping Glide Guide)
- Gauge Blocks
- Angle Adjustment Washers
- All Required Hardware
- Instruction Manual
- Polisher NOT Included
Valve Bracket Assembly
NO LONGER AVAILABLE
No. 117, SOLD AS AN ASSEMBLY, INCLUDES 2 SET SCREWS #19
Hose Assembly
No. 115. Hose assembly for Seam Phantom
Sold as a complete 6′ assembly with brass fitting on one end and brass garden hose fitting on the opposite end.
SL3® 3 Inch Rigid Turbo Abrasive, 150 Grit
$42.95 (MSRP) AVAILABLE THROUGH A STOCKING DISTRIBUTOR ONLY.
3″, rigid backed, turbo abrasive
- 150 grit – Popular replacement turbo for the Seam Phantom®
- Wet use only
- 3 1/8″ actual outside diameter
- Locks into the SL3® Snail Lock Adapter
- Maximum RPM 4000
Seam Phantom® Center Water Feed Electric Package
ORIGINAL SEAM PHANTOM NO LONGER AVAILABLE
SEAM PHANTOM 2.0 AVAILABLE FROM A DISTRIBUTOR NOW
$1,770.00 (MAP)
The Seam Phantom® is an innovative system for producing near-perfect seams in all types of stone and quartz. The system utilizes a diamond cup wheel followed by up to three diamond abrasives and a precise depth adjustment to eliminate chips and produce a clean sharp edge. The rigid design and Glide Guide straight edge keep each half of the seam straight and true. When the counter is assembled you can produce a nearly invisible seam.
Dress Flawless seams in 15-20 minutes. The Center Water Feed Electric Seam Phantom® is designed to fit onto the Makita PW5001C polisher. Made in the U.S.A. Polisher sold separately.
Kit Includes:
- Seam Phantom®
- 48″ Glide Guide Rail (72″/92″ Sold Separately)
- Adapter for electric polisher
- SL3 Adapter(Also Available in M14 Thread)
- 60 Grit SL3 Rigid Turbo
- 150 Grit SL3 Rigid Turbo
- 300 Grit SL3 Rigid Turbo
- 2″ SL3 Cup Wheel
- Upgraded Tool Box (February 2019)
- 2 C-Clamps (For clamping Glide Guide)
- 2 Gauge Blocks
- Angle Adjustment Washers
- All Required Hardware
- Instruction Manual
- Polisher sold separately
Glide Guide, 48″
Glide Guide, 92″
$310.00 (MSRP) AVAILABLE THROUGH A STOCKING DISTRIBUTOR ONLY.
92″ Glide Guide Rail, for seams up to 86″ long. In order to keep the shipping cost under control we are replacing the old 96″ Glide Guide with this slightly shorter version.
This item will drop ship directly from the manufacturer – separate from the rest of your order