SL3® Snail Lock Adapter 
Arbor Spacer
$8.85
Arbor Spacer for use with the Original Electric Seam Phantom®. Installed between the SL3 snail lock adapter and the Makita polisher to get the most beneficial turbo abrasive position. This spacer is also used on some Seam Phantom 2.0 configurations.
Arbor Spacer Thickness 0.19 inches.
Related Products
Glide Guide, 72″
72″ Glide Guide Rail for use with the ORIGINAL Seam Phantom. Can be used to produce seams up to 66″ long. This was our preferred guide rail design for over a decade. Also available in 48″ and 92″
*Note: Does not work with Seam Phantom 2.0
*Note: This item is considered “oversize” by FedEx. The shipping cost will include additional fees for “oversize” and handling.
Hose Assembly
No. 115. Hose assembly for Seam Phantom
Sold as a complete 6′ assembly with a brass threaded male fitting to attach to the valve and a brass female garden hose fitting on the opposite end. All hose assemblies will be supplied with a straight fitting to attach to the valve instead of the old 45 degree fitting.
For use on all Electric Seam Phantoms that require external water feed.
Set Screws
NO. 122, Set screws.
Sold as a pack of (5) #122 set screws
Fits #121 air polisher adapter (red orientation dot on top) on a Seam Phantom (air version). Previous air adapters (white orientation dot on top) used a smaller set screw. Call for availability of the smaller screw.
Glide Guide, 92″
92″ Glide Guide Rail for use with the ORIGINAL Seam Phantom. Can be used to produce seams up to 86″ long. This was our preferred guide rail design for over a decade. Also available in 48″ and 72″
*Note: Does not work with Seam Phantom 2.0
*Note: This item is considered “oversize” by FedEx. The shipping cost will include additional fees for “oversize” and handling.
SL3® 3 Inch Rigid Turbo Abrasive, 300 Grit
3″, rigid backed, turbo abrasive
- 300 grit – Popular replacement turbo for the Seam Phantom®
- Wet use only
- 3 1/8″ actual outside diameter
- Locks into the SL3® Snail Lock Adapter
- Maximum RPM 4000
SL3® 3 Inch Rigid Turbo Abrasive, 150 Grit
3″, rigid backed, turbo abrasive
- 150 grit – Popular replacement turbo for the Seam Phantom®
- Wet use only
- 3 1/8″ actual outside diameter
- Locks into the SL3® Snail Lock Adapter
- Maximum RPM 4000
SL3® Snail Lock Adapter (M14 Version)
- Fits M14 Threads
- Balanced to eliminate vibration
- Snail lock attachment grips all SL3® components
Also available in 5/8-11 thread.
Metric Screw and Shim Washer
No. 27 & No. 31, Original Seam Phantom attachment screws
Sold as a kit with (4) #27 screws and (4) #31 shim washers
Screws used to attach the Original Seam Phantom to a Makita Grinder or air polisher adapter, and Shim washers used to fine-tune the grinding angle
Not for use with Seam Phantom 2.0