Glide Guide, 92" 
Bolt
$11.95
NO. 16, Bolt to attach the Original Seam Phantom Knob, Sold individually
Not for use on Seam Phantom 2.0
Related Products
SL3® 3 Inch Rigid Turbo Abrasive, 60 Grit
3″, rigid backed, turbo abrasive
- 60 grit – Popular replacement turbo for the Seam Phantom®
- Wet use only
- 3 1/8″ actual outside diameter
- Locks into the SL3® Snail Lock Adapter
- Maximum RPM 4000
Screws
No. 1, Screws
Sold in a pack of (10) #1 screws
Attaches the white rub plate and valve bracket on the original Seam Phantom®. Also used for the rub plates, valve bracket and spray shield on Seam Phantom® 2.0 LT & DLX versions. Buy multiple packs if you require more than 10 screws.
Arbor Spacer
Arbor Spacer for use with all Electric Seam Phantoms®. Installed between the red snail lock adapter and the grinder to locate the turbo at the most useful position. Works with 5/8-11 or M14 threads.
- 0.19″ thick for all original Seam Phantoms® and most Seam Phantom® 2.0 versions
- 0.32″ thick for Seam Phantom® 2.0 with Metabo grinder ONLY
Set Screws
NO. 122, Set screws.
Sold as a pack of (5) #122 set screws
Fits #121 air polisher adapter (red orientation dot on top) on a Seam Phantom (air version). Previous air adapters (white orientation dot on top) used a smaller set screw. Call for availability of the smaller screw.
Metric Screw and Shim Washer
No. 27 & No. 31, Original Seam Phantom attachment screws
Sold as a kit with (4) #27 screws and (4) #31 shim washers
Screws used to attach the Original Seam Phantom to a Makita Grinder or air polisher adapter, and Shim washers used to fine-tune the grinding angle
Not for use with Seam Phantom 2.0
SL3® Snail Lock Adapter
- Fits 5/8-11 Threads
- Balanced to eliminate vibration
- Snail lock attachment grips all SL3® components
Also available in M14 thread.
Set Screws
NO. 19. Sold in a pack of 2.
Set Screws for the original black valve bracket used on the original electric Seam Phantoms®
Not for use on Seam Phantom 2.0
White Rub Plate – Electric
This rub plate is intended to be used with the Original Electric Seam Phantom. Also known as “The Shoe”. This version has extra holes and channels to distribute the water routed through the rub plate on the original design.
Not for use on Seam Phantom 2.0