Adjustment Screw Replacement Kit 
Updated Wheel Axle Assembly 
Wheel Axle Assembly
NO LONGER AVAILABLE
NO. 15, 17, 18. Sold as a kit with (1) #15 wheel axles, (1) #17 bearing shims, and (1) #18 lock nuts.
Related Products
Set Screws
NO. 122, Set screws.
Sold as a pack of (5) #122 set screws
Fits #121 air polisher adapter (red orientation dot on top) on a Seam Phantom (air version). Previous air adapters (white orientation dot on top) used a smaller set screw. Call for availability of the smaller screw.
SL3® 3 Inch Rigid Turbo Abrasive, 60 Grit
3″, rigid backed, turbo abrasive
- 60 grit – Popular replacement turbo for the Seam Phantom®
- Wet use only
- 3 1/8″ actual outside diameter
- Locks into the SL3® Snail Lock Adapter
- Maximum RPM 4000
SL3® Cup Wheel – 2 Inch
2″ cup Wheel for use with the Electric or Air Seam Phantom to create the undercut or back bevel.
- Locks into the SL3® Snail Lock Adapter
- Maximum RPM 10,000
Glide Guide, 72″
72″ Glide Guide Rail for use with the ORIGINAL Seam Phantom. Can be used to produce seams up to 66″ long. This was our preferred guide rail design for over a decade. Also available in 48″ and 92″
*Note: Does not work with Seam Phantom 2.0
*Note: This item is considered “oversize” by FedEx. The shipping cost will include additional fees for “oversize” and handling.
Glide Guide, 48″
*Note: Does not work with Seam Phantom 2.0
Arbor Extension (M14 Version)
For use with an Air Polisher on an Original Seam Phantom or Seam Phantom 2.0
- Stainless steel construction
- 1 1/4″ long
- Center water feed compatible
- M14 internal and external threads
- Made in the U.S.A.
Also available in 5-8/11 Thread.
White Rub Plate – Electric
This rub plate is intended to be used with the Original Electric Seam Phantom. Also known as “The Shoe”. This version has extra holes and channels to distribute the water routed through the rub plate on the original design.
Not for use on Seam Phantom 2.0
Metric Screw and Shim Washer
No. 27 & No. 31, Original Seam Phantom attachment screws
Sold as a kit with (4) #27 screws and (4) #31 shim washers
Screws used to attach the Original Seam Phantom to a Makita Grinder or air polisher adapter, and Shim washers used to fine-tune the grinding angle
Not for use with Seam Phantom 2.0