Hose Assembly
$53.85
No. 115. Hose assembly for Seam Phantom
Sold as a complete 6′ assembly with a brass threaded male fitting to attach to the valve and a brass female garden hose fitting on the opposite end. All hose assemblies will be supplied with a straight fitting to attach to the valve instead of the old 45 degree fitting.
For use on all Electric Seam Phantoms that require external water feed.
Related Products

Metric Screw and Shim Washer
No. 27 & No. 31, Original Seam Phantom attachment screws
Sold as a kit with (4) #27 screws and (4) #31 shim washers
Screws used to attach the Original Seam Phantom to a Makita Grinder or air polisher adapter, and Shim washers used to fine-tune the grinding angle
Not for use with Seam Phantom 2.0

Arbor Extension (M14 Version)
For use with an Air Polisher on an Original Seam Phantom or Seam Phantom 2.0
- Stainless steel construction
- 1 1/4″ long
- Center water feed compatible
- M14 internal and external threads
- Made in the U.S.A.
Also available in 5-8/11 Thread.

Guide Wheel Assembly
Replacement wheel for all Original Seam Phantoms – includes wheel and stainless bearing. This wheel has a square profile for use with the Original Seam Phantom and Glide Guide.
Price is for one complete wheel. Order quantity (2) if you need a pair.
Not for use with Seam Phantom 2.0 or the Ultra Guide.

Glide Guide, 72″
72″ Glide Guide Rail for use with the ORIGINAL Seam Phantom. Can be used to produce seams up to 66″ long. This was our preferred guide rail design for over a decade. Also available in 48″ and 92″
*Note: Does not work with Seam Phantom 2.0
*Note: This item is considered “oversize” by FedEx. The shipping cost will include additional fees for “oversize” and handling.

Ultra Guide, 46″
Designed from the ground-up for use with the Seam Phantom® 2.0. This guide provides next-level accuracy when producing superior seams in stone slab material.
This is the guide provided with every new Seam Phantom® 2.0
*Note: This guide will not work with the original Seam Phantom unless you change out the wheels

SL3® Snail Lock Adapter (M14 Version)
- Fits M14 Threads
- Balanced to eliminate vibration
- Snail lock attachment grips all SL3® components
Also available in 5/8-11 thread.

Set Screws
NO. 19. Sold in a pack of 2.
Set Screws for the original black valve bracket
Not for use on Seam Phantom 2.0

SL3® 3 Inch Rigid Turbo Abrasive, 150 Grit
3″, rigid backed, turbo abrasive
- 150 grit – Popular replacement turbo for the Seam Phantom®
- Wet use only
- 3 1/8″ actual outside diameter
- Locks into the SL3® Snail Lock Adapter
- Maximum RPM 4000