Ultra Guide, 46" 
Ultra Guide, 92″
$430.00
Designed from the ground-up for use with the Seam Phantom® 2.0. This guide provides next-level accuracy when producing superior seams in stone slab material. This is the long guide to use with the new Seam Phantom® 2.0
*Note: This guide will not work with the original Seam Phantom unless you change out the wheels
*Note: This item is considered “oversize” by FedEx. The shipping cost will include additional fees for “oversize” and handling.
Related Products
Metric Screw and Shim Washer
No. 27 & No. 31, Original Seam Phantom attachment screws
Sold as a kit with (4) #27 screws and (4) #31 shim washers
Screws used to attach the Original Seam Phantom to a Makita Grinder or air polisher adapter, and Shim washers used to fine-tune the grinding angle
Not for use with Seam Phantom 2.0
White Rub Plate – Electric
This rub plate is intended to be used with the Original Electric Seam Phantom. Also known as “The Shoe”. This version has extra holes and channels to distribute the water routed through the rub plate on the original design.
Not for use on Seam Phantom 2.0
Glide Guide, 48″
*Note: Does not work with Seam Phantom 2.0
Screws
No. 1, Screws
Sold in a pack of (10) #1 screws
Attaches the white rub plate and valve bracket on the original Seam Phantom®. Also used for the rub plates, valve bracket and spray shield on Seam Phantom® 2.0 LT & DLX versions. Buy multiple packs if you require more than 10 screws.
Set Screws
NO. 122, Set screws.
Sold as a pack of (5) #122 set screws
Fits #121 air polisher adapter (red orientation dot on top) on a Seam Phantom (air version). Previous air adapters (white orientation dot on top) used a smaller set screw. Call for availability of the smaller screw.
Updated Wheel Axle Assembly
Updated version of the GWAF.
Sold as a kit (1) #215 Brass Axle, (1) #17 Bearing Shim, (1) #216 Screw, and (1) #217 Washer.
Two Axle assemblies required per Seam Phantom
Universal Replacement for ALL Seam Phantoms.
Hose Assembly
No. 115. Hose assembly for Seam Phantom
Sold as a complete 6′ assembly with a brass threaded male fitting to attach to the valve and a brass female garden hose fitting on the opposite end. All hose assemblies will be supplied with a straight fitting to attach to the valve instead of the old 45 degree fitting.
For use on all Electric Seam Phantoms that require external water feed.
Electric to Air Kit
This kit allows you to convert your Original Electric Seam Phantom® to use an air polisher. It comes with Air Adapter, # 121 (complete with all required set screws), and Stainless Steel Arbor Extension, #123, with 5/8-11 thread.
These parts are also compatible with Seam Phantom 2.0 but additional parts may be required to complete a conversion depending on the starting configuration.
The air adapter fits polishers with a maximum nose diameter of 2.125″, (Click Here for Image).
Also available in M14 thread. Please call the office to order a kit with M14 thread.
Click Here to Watch Our Electric to Air Conversion Kit Video!