White Rub Plate – Electric
$61.90
This rub plate is intended to be used with the Original Electric Seam Phantom. Also known as “The Shoe”. This version has extra holes and channels to distribute the water routed through the rub plate on the original design.
Not for use on Seam Phantom 2.0
Related Products
SL3® 3 Inch Rigid Turbo Abrasive, 60 Grit
3″, rigid backed, turbo abrasive
- 60 grit – Popular replacement turbo for the Seam Phantom®
- Wet use only
- 3 1/8″ actual outside diameter
- Locks into the SL3® Snail Lock Adapter
- Maximum RPM 4000
Glide Guide, 72″
72″ Glide Guide Rail for use with the ORIGINAL Seam Phantom. Can be used to produce seams up to 66″ long. This was our preferred guide rail design for over a decade. Also available in 48″ and 92″
*Note: Does not work with Seam Phantom 2.0
*Note: This item is considered “oversize” by FedEx. The shipping cost will include additional fees for “oversize” and handling.
Ball Valve
NO LONGER AVAILABLE
N0. 116, Ball valve for the Original Electric Seam Phantom, Sold individually.
SL3® 3 Inch Rigid Turbo Abrasive, 150 Grit
3″, rigid backed, turbo abrasive
- 150 grit – Popular replacement turbo for the Seam Phantom®
- Wet use only
- 3 1/8″ actual outside diameter
- Locks into the SL3® Snail Lock Adapter
- Maximum RPM 4000
SL3® Cup Wheel – 2 Inch
2″ cup Wheel for use with the Electric or Air Seam Phantom to create the undercut or back bevel.
- Locks into the SL3® Snail Lock Adapter
- Maximum RPM 10,000
Set Screws
NO. 122, Set screws.
Sold as a pack of (5) #122 set screws
Fits #121 air polisher adapter (red orientation dot on top) on a Seam Phantom (air version). Previous air adapters (white orientation dot on top) used a smaller set screw. Call for availability of the smaller screw.
Adjustment Screw Replacement Kit
Adjustment Screw Replacement Kit – Upgrade for Original Seam Phantoms S/N 0001-0199. Replacement Part for S/N 0200 and higher.
This is a more durable Adjustment Screw assembly that is standard on S/N 0200 and higher. It can be easily retrofitted on S/N 0001-0199. Also updated in 2014 to include stronger e-clips and different shim washers.
**This Adjustment Screw fits all Original Air and Original Electric Seam Phantoms**
Not compatible with the Original Center Water Feed Electric Seam Phantom
Not compatible with Seam Phantom 2.0
Kit includes:
(1) #113 Adjustment Screw with Knob
(1) #8 E-Clip
(1) #41 Heavy Duty E-Clip
(2) #114 Washers
(2) #3 Shim Washers
P-Clip Kit
NO. 5 & No. 6, P-Clip and screw kit
Sold as a kit with (1) #5 P-Clip and (1) #6 screw
Used to attach the rub plate water supply tube to the Original Electric Seam Phantom body.
Not for use on Seam Phantom 2.0