Showing all 56 results
Multi-Function Wrench – Sink BULL LT
This Multi-Function Wrench is designed for use with The Sink BULL™LT. The Wrench fits all 3″ and 1″ Rapid-Z Abrasives. It is also used as a gauge block to set the initial grinding height on the Sink BULL™LT.
NEW White Rub Plate Nose – Sink BULL LT
This is a replacement white plastic rub plate for the lower surface of the Sink BULL™LT – THIS IS THE NOSE PORTION ONLY. This kit includes 8 extra attachment screws.
- Fits the NEW Sink BULL™LT
- Does NOT fit the original Sink BULL™
Updated Wheel Axle Assembly
Updated version of the GWAF.
Sold as a kit (1) #215 Brass Axle, (1) #17 Bearing Shim, (1) #216 Screw, and (1) #217 Washer.
Two Axle assemblies required per Seam Phantom
Universal Replacement for ALL Seam Phantoms.
Guide Wheel Assembly
Replacement wheel for all Original Seam Phantoms – includes wheel and stainless bearing. This wheel has a square profile for use with the Original Seam Phantom and Glide Guide.
Price is for one complete wheel. Order quantity (2) if you need a pair.
Not for use with Seam Phantom 2.0 or the Ultra Guide.
White Rub Plate – Electric
This rub plate is intended to be used with the Original Electric Seam Phantom. Also known as “The Shoe”. This version has extra holes and channels to distribute the water routed through the rub plate on the original design.
Not for use on Seam Phantom 2.0
White Rub Plate – Original Air and Seam Phantom 2.0
This Rub Plate is designed for use with the Original Air Seam Phantom and is the main rub plate on Seam Phantom 2.0
*Updated* Grit Shield (Stainless Steel)
No. 108. Grit Shield for Original Seam Phantom and Seam Phantom 2.0, universal replacement, sold individually.
*Updated* Spray Shield
No. 105. Stainless steel spray shield for the Original Electric Seam Phantom® . This replaces the old black aluminum spray shield.
Not for use on Seam Phantom 2.0.
Adjustment Screw Replacement Kit
Adjustment Screw Replacement Kit – Upgrade for Original Seam Phantoms S/N 0001-0199. Replacement Part for S/N 0200 and higher.
This is a more durable Adjustment Screw assembly that is standard on S/N 0200 and higher. It can be easily retrofitted on S/N 0001-0199. Also updated in 2014 to include stronger e-clips and different shim washers.
**This Adjustment Screw fits all Original Air and Original Electric Seam Phantoms**
Not compatible with the Original Center Water Feed Electric Seam Phantom
Not compatible with Seam Phantom 2.0
Kit includes:
(1) #113 Adjustment Screw with Knob
(1) #8 E-Clip
(1) #41 Heavy Duty E-Clip
(2) #114 Washers
(2) #3 Shim Washers
Adjustment Screw Replacement Kit for Center Water Feed Electric
This Adjustment Screw Replacement Kit comes with a longer Adjustment Screw for use with the Original Center Water Feed Electric Seam Phantom® only.
Not for use on Seam Phantom 2.0.
**For Original Center Water Feed Electric Seam Phantoms utilizing a Makita PW5001C electric polisher ONLY**
Kit includes:
(1) Longer Adjustment Screw with Knob
(1) #8 E-Clip
(1) #41 Heavy Duty E-Clip
(2) #114 Washers
(2) #3 Shim Washers
Electric to Air Kit
This kit allows you to convert your Original Electric Seam Phantom® to use an air polisher. It comes with Air Adapter, # 121 (complete with all required set screws), and Stainless Steel Arbor Extension, #123, with 5/8-11 thread.
These parts are also compatible with Seam Phantom 2.0 but additional parts may be required to complete a conversion depending on the starting configuration.
The air adapter fits polishers with a maximum nose diameter of 2.125″, (Click Here for Image).
Also available in M14 thread. Please call the office to order a kit with M14 thread.
Click Here to Watch Our Electric to Air Conversion Kit Video!
Gauge Blocks, Pair, Replacement
Used with the Original Seam Phantom to set the proper offset distance before clamping the Glide Guide. Supplied as a pair with the Original Seam Phantom® package.
Not for use with Seam Phantom 2.0 or Ultra Guide
Hose Assembly
No. 115. Hose assembly for Seam Phantom
Sold as a complete 6′ assembly with a brass threaded male fitting to attach to the valve and a brass female garden hose fitting on the opposite end. All hose assemblies will be supplied with a straight fitting to attach to the valve instead of the old 45 degree fitting.
For use on all Electric Seam Phantoms that require external water feed.
Metric Screw and Shim Washer
No. 27 & No. 31, Original Seam Phantom attachment screws
Sold as a kit with (4) #27 screws and (4) #31 shim washers
Screws used to attach the Original Seam Phantom to a Makita Grinder or air polisher adapter, and Shim washers used to fine-tune the grinding angle
Not for use with Seam Phantom 2.0
O-Ring
NO. 34, O-Ring, Sold individually.
For use on the Original Electric Seam Phantom
Not for use on Seam Phantom 2.0
P-Clip Kit
NO. 5 & No. 6, P-Clip and screw kit
Sold as a kit with (1) #5 P-Clip and (1) #6 screw
Used to attach the rub plate water supply tube to the Original Electric Seam Phantom body.
Not for use on Seam Phantom 2.0
Placard Kit
No. 32 & No. 33, Safety Placard Kit
Sold as a kit with (1) #32 Eye Protection placard and (1) #33 GFCI Protection placard
Universal replacement for all Seam Phantoms and Sink BULL.
Rapid Z™-CUT Bearing Press
No. 401, Bearing press
This is the press used to install the bearing in the Rapid Z™-CUT bearing replacement video. We offer it here as a convenience.
Click Here to Watch Our Rapid Z™ Bearing Replacement Video!
Rapid Z™-CUT Blade Spacer
No. 111, Blade spacer, Sold Individually
This is the spacer between the blades on a Rapid Z™-CUT
13 required for the Rapid Z™-CUT with top bearing
17 required for the Rapid Z™-CUT NO bearing
Rapid Z™-CUT Cap
No. 103, Cap for Rapid Z™-CUT
Retains the blades on the Rapid Z™-CUT. Works on Rapid Z™-CUT with and without a template follower bearing
Rapid Z™-CUT Screws
No. 23, Screws for bearing ring
Sold in a pack of (4) #23 screws
Replacement screws used to attach the large outer bearing ring on a Rapid Z™-CUT
Rapid-Z™ Bolt and Washer Kit
No. 21 & No. 22 Bolt Kit for Rapid Z™-CUT and Rapid Z™-DRUM
Sold as a kit with (1) #21 bolt and (1) #22 washer
Used to retain the blades and drum wheels on the Rapid Z™-CUT and Rapid Z™-DRUMS
Screws
No. 1, Screws
Sold as a pack of (10) #1 screws
Attaches the white rub plate and valve bracket on an Original Seam Phantom
Set Screws
NO. 19. Sold in a pack of 2.
Set Screws for the original black valve bracket
Not for use on Seam Phantom 2.0
Set Screws
NO. 122, Set screws.
Sold as a pack of (5) #122 set screws
Fits #121 air polisher adapter (red orientation dot on top) on a Seam Phantom (air version). Previous air adapters (white orientation dot on top) used a smaller set screw. Call for availability of the smaller screw.
Tube Fitting
NO. 20, Tube Fitting, Sold Individually, color may vary
For use on the Original Electric Seam Phantom to connect the rub plate water supply tube to the valve
Not for use on Seam Phantom 2.0
UPDATED Valve Bracket
Updated version of No. 117, sold individually. This is the bracket only, does not include valve, elbow fitting, or attachment screws.
For use on all Electric Seam Phantoms that require external water feed.
Purchase VALVE221 for use with this Bracket. Watch the video below for more info.
.
.
Valve Bracket Assembly
NO LONGER AVAILABLE
No. 117, SOLD AS AN ASSEMBLY, INCLUDES 2 SET SCREWS #19
Wheel Axle Assembly
NO LONGER AVAILABLE
NO. 15, 17, 18. Sold as a kit with (1) #15 wheel axles, (1) #17 bearing shims, and (1) #18 lock nuts.
3″ Rapid Z™-CUT Inner Ring
No 105, Inner bearing ring
Inner ring that is pressed onto the template follower bearing on a Rapid Z™-CUT
Bearing sold separately
3″ Rapid Z™-CUT Outer Ring
No. 107, Outer bearing ring
Large outer ring used on the Rapid Z™-CUT with new blades
3″ Rapid Z™-CUT Replacement Bearing
No. 24, Bearing for Rapid Z™-CUT
Replacement bearing for the Rapid Z™-CUT with template follower
Click Here to Watch Our Rapid Z™ Bearing Replacement Video!
3″ Rapid Z™-DRUM Arbor Key
No. 240, Key
Replacement key for the 3″ Rapid ZTM-DRUM
3″ Rapid Z™-DRUM Cap
No. 203, Cap for Rapid ZTM-DRUM
Retains the diamond drum on the Rapid ZTM-DRUM
3″ Rapid Z™-DRUM Replacement Bearing
No. 230, Replacement Bearing for 3″ Rapid ZTM-DRUM
Ball Valve
NO LONGER AVAILABLE
N0. 116, Ball valve for the Original Electric Seam Phantom, Sold individually.
Bolt
NO. 16, Bolt to attach the Original Seam Phantom Knob, Sold individually
Not for use on Seam Phantom 2.0
UPDATED Ball Valve
Updated version of N0. 116, ball valve for Electric Seam Phantom, Sold individually.
For use on all Electric Seam Phantoms that require external water feed.
Purchase BRACKET220 for use with this valve. Watch the video below for more info.
.
.
Air Adapter
Allows the mounting of an Air Polisher on a Seam Phantom®. Fits polishers with a maximum nose diameter of 2.125″, (Click Here for Image).
Includes Air Adapter part #121 and Set Screws #122.
This plus the Arbor Extension is all that is needed to convert an Original Electric Seam Phantom to Air.
Also compatible with Seam Phantom 2.0.
White Rub Plate – Original Sink BULL™
This is a replacement white plastic rub plate for the lower surface of the original Sink BULL™. This kit includes 6 extra attachment screws.
- Fits the original Sink BULL™
- Does NOT fit the New Sink BULL™LT
Sink BULL™ – UPGRADED Replacement Grips
Tired of your Sink BULL™ grips sliding around on the bar? We were too!!! After trying every type of grip adhesive we could find, we just sourced better grips. We’ve been using them for a couple years and our fabricators love them. These upgraded replacement grips have the extra screw length required to fit the original Sink BULL™.
- Sold as a pair
- Fits the Original Sink BULL™
- Does NOT fit the New Sink BULL™LT
Sink BULL™ Height Adjustment Handle Kit
Replacement Sink BULL™ height adjustment handle includes bolt and washer.
- Universal replacement for Sink BULL and Sink BULL LT
- Sold as a kit
Sink BULL™ Height Adjustment Handle Only
Replacement Sink BULL™ height adjustment handle.
- Universal replacement for Sink BULL and Sink BULL LT
Tool Box – **DISCONTINUED**
**DISCONTINUED** May 2024
Upgraded tool box holds Seam Phantom, turbo abrasives, and all accessories
This tool box was included with all Seam Phantom Electrical Packages from February 2019 to May 2024
Arbor Extension
For use with an Air Polisher on an Original Seam Phantom or Seam Phantom 2.0
Updated Version of our hex Arbor Extension.
- Stainless steel construction
- 1 1/4″ long
- Center water feed compatible
- Standard 5/8-11 internal and external threads
- Made in the U.S.A.
Also available in M14 thread.
Arbor Extension (M14 Version)
For use with an Air Polisher on an Original Seam Phantom or Seam Phantom 2.0
- Stainless steel construction
- 1 1/4″ long
- Center water feed compatible
- M14 internal and external threads
- Made in the U.S.A.
Also available in 5-8/11 Thread.
Spray Skirt for Makita Grinder
Intended for the Original Electric Seam Phantom this spray skirt helps keep the water out of your Makita! Ensure your spray skirt is wrapped tight to the Makita to get the best protection.
Not for use with Seam Phantom 2.0
Grip Knob
Top grip knob for the Original Seam Phantom
Not for use with Seam Phantom 2.0
Adjustment Nut
Replacement Brass Adjustment Nut, custom made for the Original Seam Phantom.
Not for use with Seam Phantom 2.0
Arbor Spacer
Arbor Spacer for use with the Original Electric Seam Phantom®. Installed between the SL3 snail lock adapter and the Makita polisher to get the most beneficial turbo abrasive position. This spacer is also used on some Seam Phantom 2.0 configurations.
Arbor Spacer Thickness 0.19 inches.
Cut Tube Repair Kit
For Original Electric Seam Phantoms with a cut tube. This kit also replaces the grit shield with a larger version to prevent further cutting. The arbor spacer allows for more wear from the SL3 turbos. Note: the current tube is made from an upgraded material and is now red.
Not for use with Seam Phantom 2.0
Kit includes:
(1) Vinyl Tube
(1) Grit Shield
(1) Arbor Spacer (Thickness 0.19 inches)
Clip, Washer & Bushing Kit
Replacement Bushings, washers, and E-Clips. The black bushings shown have been repeatedly upgraded to better material and are now burgundy color
**These parts will fit all Original Seam Phantoms and Seam Phantom 2.0**
Kit includes:
(2) #9 Bushings
(1) #8 E-Clip
(1) #41 Heavy Duty E-Clip
(2) #114 Washers
(2) #3 Shim Washers