P-Clip Kit
$3.35
NO. 5 & No. 6, P-Clip and screw kit
Sold as a kit with (1) #5 P-Clip and (1) #6 screw
Used to attach water tube to electric Seam Phantom
Related Products
Placard Kit
No. 32 & No. 33, Safety Placard Kit
Sold as a kit with (1) #32 Eye Protection placard and (1) #33 GFCI Protection placard
Gauge Blocks, Pair, Replacement
Used for getting the proper offset distance of the Glide Guide. Supplied as a pair with the Seam Phantom® package.
Screws
No. 1, Srews
Sold as a pack of (10) #1 screws
Attaches the white rub plate and valve bracket on a Seam Phantom
*Updated* Spray Shield
No. 105. *Updated* spray shield for the electric Seam Phantom®
SL3® Snail Lock Adapter (M14 Version)
$54.95 (MSRP) AVAILABLE THROUGH A STOCKING DISTRIBUTOR ONLY.
- Fits M14 Threads
- Balanced to eliminate vibration
- Snail lock attachment grips all SL3® components
Also available in 5/8-11 thread.
SL3® 3 Inch Rigid Turbo Abrasive, 300 Grit
$42.95 (MSRP) AVAILABLE THROUGH A STOCKING DISTRIBUTOR ONLY.
3″, rigid backed, turbo abrasive
- 300 grit – Popular replacement turbo for the Seam Phantom®
- Wet use only
- 3 1/8″ actual outside diameter
- Locks into the SL3® Snail Lock Adapter
- Maximum RPM 4000
Seam Phantom® Original Electric Package
$1,825.00 (MAP) AVAILABLE THROUGH A STOCKING DISTRIBUTOR ONLY.
The Seam Phantom® is an innovative system for producing near-perfect seams in all types of stone and quartz. The system utilizes a diamond cup wheel followed by up to three diamond abrasives and a precise depth adjustment to eliminate chips and produce a clean sharp edge. The rigid design and Glide Guide straight edge keep each half of the seam straight and true. When the counter is assembled you can produce a nearly invisible seam.
Dress Flawless seams in 15-20 minutes. The original Electric Seam Phantom® is designed to fit onto any of the following Makita grinders: 9564CV, 9565CV (USA), GA5042C, GA4542C (USA/Canada), GA5040C, GA4540C (U.K), 9565CVR (Africa). Made in the U.S.A. Grinder sold separately.
Kit Includes:
- Seam Phantom®
- 48″ Glide Guide Rail (72″/92″ Sold Separately)
- Upgraded Tool Box (February 2019)
- GFCI Adapter
- SL3 Adapter(Also Available in M14 Thread)
- 60 Grit SL3 Rigid Turbo
- 150 Grit SL3 Rigid Turbo
- 300 Grit SL3 Rigid Turbo
- 2″ SL3 Cup Wheel
- 2 C-Clamps (For clamping Glide Guide)
- 2 Gauge Blocks
- Spray Skirt for Grinder
- Splash Guard Angle
- Angle Adjustment Washers
- All Required Hardware
- Instruction Manual
- Grinder sold separately