Placard Kit 
Spray Skirt for Makita Grinder
$27.20
Intended for the Original Electric Seam Phantom this spray skirt helps keep the water out of your Makita! Ensure your spray skirt is wrapped tight to the Makita to get the best protection.
Not for use with Seam Phantom 2.0
Related Products
Glide Guide, 72″
72″ Glide Guide Rail for use with the ORIGINAL Seam Phantom. Can be used to produce seams up to 66″ long. This was our preferred guide rail design for over a decade. Also available in 48″ and 92″
*Note: Does not work with Seam Phantom 2.0
*Note: This item is considered “oversize” by FedEx. The shipping cost will include additional fees for “oversize” and handling.
Adjustment Screw Replacement Kit
Adjustment Screw Replacement Kit – Upgrade for Original Seam Phantoms S/N 0001-0199. Replacement Part for S/N 0200 and higher.
This is a more durable Adjustment Screw assembly that is standard on S/N 0200 and higher. It can be easily retrofitted on S/N 0001-0199. Also updated in 2014 to include stronger e-clips and different shim washers.
**This Adjustment Screw fits all Original Air and Original Electric Seam Phantoms**
Not compatible with the Original Center Water Feed Electric Seam Phantom
Not compatible with Seam Phantom 2.0
Kit includes:
(1) #113 Adjustment Screw with Knob
(1) #8 E-Clip
(1) #41 Heavy Duty E-Clip
(2) #114 Washers
(2) #3 Shim Washers
Gauge Blocks, Pair, Replacement
Used with the Original Seam Phantom to set the proper offset distance before clamping the Glide Guide. Supplied as a pair with the Original Seam Phantom® package.
Not for use with Seam Phantom 2.0 or Ultra Guide
Arbor Extension (M14 Version)
For use with an Air Polisher on an Original Seam Phantom or Seam Phantom 2.0
- Stainless steel construction
- 1 1/4″ long
- Center water feed compatible
- M14 internal and external threads
- Made in the U.S.A.
Also available in 5-8/11 Thread.
Updated Wheel Axle Assembly
Updated version of the GWAF.
Sold as a kit (1) #215 Brass Axle, (1) #17 Bearing Shim, (1) #216 Screw, and (1) #217 Washer.
Two Axle assemblies required per Seam Phantom
Universal Replacement for ALL Seam Phantoms.
Metric Screw and Shim Washer
No. 27 & No. 31, Original Seam Phantom attachment screws
Sold as a kit with (4) #27 screws and (4) #31 shim washers
Screws used to attach the Original Seam Phantom to a Makita Grinder or air polisher adapter, and Shim washers used to fine-tune the grinding angle
Not for use with Seam Phantom 2.0
Ultra Guide, 46″
Designed from the ground-up for use with the Seam Phantom® 2.0. This guide provides next-level accuracy when producing superior seams in stone slab material.
This is the guide provided with every new Seam Phantom® 2.0
*Note: This guide will not work with the original Seam Phantom unless you change out the wheels
SL3® 3 Inch Rigid Turbo Abrasive, 150 Grit
3″, rigid backed, turbo abrasive
- 150 grit – Popular replacement turbo for the Seam Phantom®
- Wet use only
- 3 1/8″ actual outside diameter
- Locks into the SL3® Snail Lock Adapter
- Maximum RPM 4000