Sort Products
Showing 1–100 of 127 resultsSorted by popularity
White Rub Plate – Original Air and Seam Phantom 2.0
This Rub Plate is used on the Original Air Seam Phantom and is the main rub plate on Seam Phantom 2.0
SL3® 3 Inch Rigid Turbo Abrasive, 60 Grit
3″, rigid backed, turbo abrasive
- 60 grit – Popular replacement turbo for the Seam Phantom®
- Wet use only
- 3 1/8″ actual outside diameter
- Locks into the SL3® Snail Lock Adapter
- Maximum RPM 4000
SL3® 3 Inch Rigid Turbo Abrasive, 150 Grit
3″, rigid backed, turbo abrasive
- 150 grit – Popular replacement turbo for the Seam Phantom®
- Wet use only
- 3 1/8″ actual outside diameter
- Locks into the SL3® Snail Lock Adapter
- Maximum RPM 4000
Clip, Washer & Bushing Kit
Replacement Bushings, washers, and E-Clips. The black bushings shown have been repeatedly upgraded to better material and are now burgundy color
**These parts will fit all Original Seam Phantoms and Seam Phantom 2.0**
Kit includes:
(2) #9 Bushings
(1) #8 E-Clip
(1) #41 Heavy Duty E-Clip
(2) #114 Washers
(2) #3 Shim Washers
Wheel Axle Assembly
NO LONGER AVAILABLE
NO. 15, 17, 18. Sold as a kit with (1) #15 wheel axles, (1) #17 bearing shims, and (1) #18 lock nuts.
Set Screws
NO. 122, Set screws.
Sold as a pack of (5) #122 set screws
Fits #121 air polisher adapter (red orientation dot on top) on a Seam Phantom (air version). Previous air adapters (white orientation dot on top) used a smaller set screw. Call for availability of the smaller screw.
White Rub Plate – Electric
This rub plate is used with the Original Electric Seam Phantom. Also known as “The Shoe”. This version has extra holes and channels to distribute the water routed through the rub plate on the original design.
Not for use on Seam Phantom 2.0
Electric to Air Kit
This kit allows you to convert your Original Electric Seam Phantom® to use an air polisher. It comes with Air Adapter, # 121 (complete with all required set screws), and Stainless Steel Arbor Extension, #123, with 5/8-11 thread.
These parts are also compatible with Seam Phantom 2.0 but additional parts may be required to complete a conversion depending on the starting configuration.
The air adapter fits polishers with a maximum nose diameter of 2.125″, (Click Here for Image).
Also available in M14 thread. Please call the office to order a kit with M14 thread.
Click Here to Watch Our Electric to Air Conversion Kit Video!
3″ Rapid Z™-CUT Replacement Blades
Replacement blade for the Rapid Z™-CUT. Watch our video below on how to change the blades.
- 3″ diameter x .08 thick x 7/8 arbor hole
- Maximum RPM 12,000
- Price listed is for one blade
- Rapid Z™-CUT WITH TEMPLATE BEARING uses 12 replacement blades
- Rapid Z™-CUT NO BEARING uses 17 replacement blades
Click Here to Watch Our Rapid Z™ Blade Replacement Video!
Air Adapter
Allows the mounting of an Air Polisher on a Seam Phantom®. Fits polishers with a maximum nose diameter of 2.125″, (Click Here for Image).
Includes Air Adapter part #121 and Set Screws #122.
This plus the Arbor Extension is all that is needed to convert an Original Electric Seam Phantom to Air.
Also compatible with Seam Phantom 2.0.
Rapid Z™-CUT Blade Spacer
No. 111, Blade spacer, Sold Individually
This is the spacer between the blades on a Rapid Z™-CUT
13 required for the Rapid Z™-CUT with top bearing
17 required for the Rapid Z™-CUT NO bearing
Guide Wheel Assembly
Replacement wheel for all Seam Phantoms® – includes wheel and stainless bearing. Price is for one complete wheel. Order quantity (2) if you need a pair.
- Standard profile for use with the original Seam Phantom® & Glide Guide.
- Angled profile for use with Seam Phantom® 2.0 & Ultra Guide
Arbor Extension
For use with an Air Polisher on an Original Seam Phantom or Seam Phantom 2.0
Updated Version of our hex Arbor Extension.
- Stainless steel construction
- 1 1/4″ long
- Center water feed compatible
- Standard 5/8-11 internal and external threads
- Made in the U.S.A.
Also available in M14 thread.
SL3® 3 Inch Rigid Turbo Abrasive, 300 Grit
3″, rigid backed, turbo abrasive
- 300 grit – Popular replacement turbo for the Seam Phantom®
- Wet use only
- 3 1/8″ actual outside diameter
- Locks into the SL3® Snail Lock Adapter
- Maximum RPM 4000
SL3® Cup Wheel – 2 Inch
2″ cup Wheel for use with the Electric or Air Seam Phantom to create the undercut or back bevel.
- Locks into the SL3® Snail Lock Adapter
- Maximum RPM 10,000
Updated Wheel Axle Assembly
Updated version of the GWAF.
Sold as a kit (1) #215 Brass Axle, (1) #17 Bearing Shim, (1) #216 Screw, and (1) #217 Washer.
Two Axle assemblies required per Seam Phantom
Universal Replacement for ALL Seam Phantoms.
Adjustment Screw Replacement Kits
Adjustment screw replacement kits for all Seam Phantoms®
- Original version fits all original air and electric Seam Phantoms® except the original center water feed Makita version – currently still available
- Center Water feed version is slightly longer and fits the original Seam Phantoms® that use the PW5001C Makita polisher – NO LONGER AVAILBLE – purchase the Seam Phantom® 2.0 Screw
- The Seam Phantom® 2.0 version fits all the 2.0 variations and is a universal replacement for all original Seam Phantoms®
All Kits include:
(1) Adjustment Screw with Knob
(1) #8 E-Clip
(1) #41 Heavy Duty E-Clip
(2) #114 Washers
(2) #3 Shim Washers
Glide Guide, 48″
*Note: Does not work with Seam Phantom 2.0
3″ Rapid Z™-CUT Replacement Bearing
No. 24, Bearing for Rapid Z™-CUT
Replacement bearing for the Rapid Z™-CUT with template follower
Click Here to Watch Our Rapid Z™ Bearing Replacement Video!
SL3® 3 Inch Rigid Turbo Abrasive, 500 Grit
3″, rigid backed, turbo abrasive
- 500 grit
- Wet use only
- 3 1/8″ actual outside diameter
- Locks into the SL3® Snail Lock Adapter
- Maximum RPM 4000
Set Screws
NO. 19. Sold in a pack of 2.
Set Screws for the original black valve bracket used on the original electric Seam Phantoms®
Not for use on Seam Phantom 2.0
Spray Skirt for Makita Grinder
Intended for the Original Electric Seam Phantom this spray skirt helps keep the water out of your Makita! Ensure your spray skirt is wrapped tight to the Makita to get the best protection.
Not for use with Seam Phantom 2.0
Gauge Blocks, Pair, Replacement
Used with the Seam Phantom to set the proper offset distance before clamping the Guide. Supplied as a pair with all Seam Phantom® packages
- Silver aluminum version for all Original Seam Phantoms® and the Glide Guide
- Red plastic version for Seam Phantom® 2.0 and the Ultra Guide
Adjustment Nut
Replacement adjustment nut for the Seam Phantom®.
- Solid brass nut for all Original Seam Phantoms®
- Anti-rattle red plastic with brass insert for all Seam Phantom® 2.0
SL3® 3 Inch Floating Turbo Abrasive, 60 Grit (not for dressing seams)
3″ Turbo abrasive with semi-rigid plastic laminate and hook & Loop attachment for use with the 3″ Center Hub Backer and SL3® Snail Lock Adapter.
- 60 grit
- Wet use only
- 3 1/8″ outside diameter
- Color-coded light green
- Maximum RPM 4000.
*NOT For Dressing Seams With The Seam Phantom®
Twist SHIM™ Driver
The Twist Shim™ Driver is specially designed to fit a 3/8” socket or drill chuck and allows you to install and adjust Twist Shims™ with a drill or ratchet.
Click Here to Watch Our Twist SHIM™ Video!
3″ Rapid Z™-DRUM Replacement Bearing
No. 230, Replacement Bearing for 3″ Rapid ZTM-DRUM
Glide Guide, 72″
72″ Glide Guide Rail for use with the ORIGINAL Seam Phantom. Can be used to produce seams up to 66″ long. This was our preferred guide rail design for over a decade. Also available in 48″ and 92″
*Note: Does not work with Seam Phantom 2.0
*Note: This item is considered “oversize” by FedEx. The shipping cost will include additional fees for “oversize” and handling.
Ball Valve
NO LONGER AVAILABLE
N0. 116, Ball valve for the Original Electric Seam Phantom, Sold individually.
Tube Fitting
NO. 20, Tube Fitting, Sold Individually, color may vary
For use on the Original Electric Seam Phantom to connect the rub plate water supply tube to the valve
Not for use on Seam Phantom 2.0
SL3® Snail Lock Adapter
- Fits 5/8-11 Threads
- Balanced to eliminate vibration
- Snail lock attachment grips all SL3® components
Also available in M14 thread.
SL3® 3 Inch Rigid Turbo Abrasive, 60 Grit (Cosmetic Blem)
3″, rigid backed, turbo abrasive
- 60 grit – Popular replacement turbo for the Seam Phantom®
- Wet use only
- 3 1/8″ actual outside diameter
- Locks into the SL3® Snail Lock Adapter
- Maximum RPM 4000
Twist SHIM™ 50 Piece Can
Twist Shims™ is a product designed specifically for leveling stone countertops over a plywood sub-top or in other hard to access areas. They stand 0.90 inches tall and can be installed in three easy steps. Twist Shim Driver not included.
- Drive – drive Twist SHIM™ through 5/8″ holes drilled at desired shim locations
- Level – place countertop on cabinet and adjust level from underside by rotating Twist SHIM™
- Glue – inject adhesive through Twist SHIM™ to permanently lock counter in place
Twist Shim Driver (sold separately HERE) required for installation and adjustment.
Click Here to Watch Our Twist SHIM™ Video!
SL3® Original 4″ RIGID Hook and Loop Backer (3.8″ actual diameter)
4″, RIGID, hook and loop backer (3.8″ actual diameter to fit 4″ resin abrasive)
- Locks into the SL3® Snail Lock Adapter
- Designed with a “hook” face for use with hook & loop style abrasives
- Perfect size for edge polishing – the slightly smaller diameter allows a 4″ resin pad to roll over the edge slightly creating a smooth transition into inside corners
Glide Guide, 92″
92″ Glide Guide Rail for use with the ORIGINAL Seam Phantom. Can be used to produce seams up to 86″ long. This was our preferred guide rail design for over a decade. Also available in 48″ and 72″
*Note: Does not work with Seam Phantom 2.0
*Note: This item is considered “oversize” by FedEx. The shipping cost will include additional fees for “oversize” and handling.
Rapid Z™-CUT Cap
No. 103, Cap for Rapid Z™-CUT
Retains the blades on the Rapid Z™-CUT. Works on Rapid Z™-CUT with and without a template follower bearing
SL3® 3 Inch Rigid Turbo Abrasive, 1000 Grit
3″, rigid backed, turbo abrasive
- 1000 grit
- Wet use only
- 3 1/8″ actual outside diameter
- Locks into the SL3® Snail Lock Adapter
- maximum RPM 4000
SL3® 3 Inch Floating Turbo Abrasive, 500 Grit
3″ Turbo abrasive with semi-rigid plastic laminate and hook & Loop attachment for use with the 3″ Center Hub Backer and SL3® Snail Lock Adapter.
- 500 grit
- Wet use only
- 3 1/8″ outside diameter
- Color-coded blue
- Maximum RPM 4000
*NOT For Dressing Seams With The Seam Phantom®
SL3® 3 Inch Floating Turbo Abrasive, 150 Grit (not for dressing seams)
3″ Turbo abrasive with semi-rigid plastic laminate and hook & Loop attachment for use with the 3″ Center Hub Backer and SL3® Snail Lock Adapter.
- 150 grit
- Wet use only
- 3 1/8″ outside diameter
- Color-coded red
- Maximum RPM 4000
*NOT For Dressing Seams With The Seam Phantom®
SL3® 3 Inch, H&L CTR Hub Backer
Hook & loop backer For use with the 3″ Floating Turbos
Locks into the SL3® Snail Lock Adapter
*NOT for use with the Seam Phantom®
SL3® 3 Inch Floating Turbo Abrasive, 300 Grit (not for dressing seams)
3″ Turbo abrasive with semi-rigid plastic laminate and hook & Loop attachment for use with the 3″ Center Hub Backer and SL3® Snail Lock Adapter.
- 300 grit
- Wet use only
- 3 1/8″ outside diameter
- Color-coded yellow
- Maximum RPM 4000
*NOT For Dressing Seams With The Seam Phantom®
Hose Assembly
No. 115. Hose assembly for Seam Phantom® & Sink BULL™
Sold as a complete 6′ assembly with a brass threaded male fitting to attach to the valve and a brass female garden hose fitting on the opposite end. All hose assemblies will be supplied with a straight fitting to attach to the valve instead of the old 45 degree fitting.
For use on all Electric Seam Phantoms® that require external water feed plus the Sink BULL™.
SL3® 3″ RIGID Hook and Loop Backer (3.0″ actual diameter)
3″, RIGID, hook and loop backer (3.0″ actual diameter)
- Locks into the SL3® Snail Lock Adapter
- Designed with a “hook” face for use with hook & loop style abrasive
- Can be used with 3″ turbos, cut down resin pads, or small fiber pads
- This is the 3″ backer we provide in our top polish kit to drive the 3 1/4″ Natural Tan Fiber Pad
SL3® 3 Inch Floating Turbo Abrasive, 1000 Grit
3″ Turbo abrasive with semi-rigid plastic laminate and hook & Loop attachment for use with the 3″ Center Hub Backer and SL3® Snail Lock Adapter.
- 1000 grit
- Wet use only
- 3 1/8″ outside diameter
- Color-coded dark green
- Maximum RPM 4000
*NOT For Dressing Seams With The Seam Phantom®
Natural Blend Tan Pads
7 3/4″ Natural Blend Tan Fiber Pad with 3 1/4″ center cut portion
- The larger outside portion can be driven with a 7″ hook and loop backer
- The center portion can be driven with a 3″ hook and loop backer for smaller areas
- This is the Tan Fiber Pad that we supply in our top polish kit
- Sold in packs of 3
SL3® True 4″ RIGID Hook and Loop Backer (4.0″ actual diameter)
True 4″, RIGID, hook and loop backer (4.0″ actual diameter to fit 4″ resin abrasives)
- Locks into the SL3® Snail Lock Adapter
- Designed with a “hook” face for use with hook & loop style abrasives
- Machined flat for smooth running
- Perfect size for top polishing – the slightly larger diameter keeps the resin pad flatter and helps eliminate the hazy perimeter when top polishing
- These are the 4″ backers that we provide in our top polish kit for use with the Redeemer Resin Pads
Arbor Extension (M14 Version)
For use with an Air Polisher on an Original Seam Phantom or Seam Phantom 2.0
- Stainless steel construction
- 1 1/4″ long
- Center water feed compatible
- M14 internal and external threads
- Made in the U.S.A.
Also available in 5-8/11 Thread.
UPDATED Ball Valve
Updated version of N0. 116, ball valve, Sold individually.
For use on all Electric Seam Phantoms® that require external water feed and the Sink BULL™
**Now with ZINC Handle**
Purchase BRACKET220 for use with this valve on the Seam Phantom. Watch the video below for more info.
.
.
SL3® 3 Inch Rigid Turbo Abrasive, 150 Grit (Cosmetic Blem)
3″, rigid backed, turbo abrasive
- 150 grit – Popular replacement turbo for the Seam Phantom®
- Wet use only
- 3 1/8″ actual outside diameter
- Locks into the SL3® Snail Lock Adapter
- Maximum RPM 4000
Top Polish Kit – Granite & Quartzite
This is the NSI Solutions complete kit for top polishing natural granite and quartzite. This kit is the result of many years of learning and collaboration with our friends around the industry and contains the exact products we currently use in our shop to achieve superior top polish results every day.
NOT FOR USE with Engineered stone, commonly known as “Quartz”.
Kit Includes:
QTY ITEM CODE DESCRIPTION
- (1) SL3-ADAPT Snail Lock Adapter (5/8-11 or M14 thread)
- (4) SL3-FR3 3″ Center Hub Hook & Loop Backers
- (1) SL3-F150 3″ – 150 Grit Floating Turbo (Red)
- (1) SL3-F300 3″ – 300 Grit Floating Turbo (Yellow)
- (1) SL3-F500 3″ – 500 Grit Floating Turbo (Blue)
- (1) SL3-F1000 3″ – 1000 Grit Floating Turbo (Dark Green)
- (3) SL3-R4TP True 4″ Rigid Hook & Loop Backer
- (1) RD1000-4 4″ – 1000 Grit Redeemer Resin (Dark Green)
- (1) RD2000-4 4″ – 2000 Grit Redeemer Resin (Orange)
- (1) RD3000-4 4″ – 3000 Grit Redeemer Resin (Purple)
- (1) SL3-R7 7″ Rigid Hook & Loop Backer
- (1) SL3-R3 3″ Rigid Hook & Loop Backer
- (3) NB7 7 3/4″ Natural Blend Tan Pad (includes 3 1/4″ center cut)
- (1) * 8.5 oz. MB020 Granite Polish
- (1 ea) ** Presto white out pen, China Markers (red & white)
Click Here to Watch Our Latest Top Polishing Video!
SL3® 3 Inch Cup Wheel – Aggressive Grit **IMPROVED**
The SL3® 3 inch cup wheel can be used free-hand for heavy stock removal. It can also be used with the Seam Phantom® to grind back edges and clean up laminations.
**Now with IMPROVED BALANCE for smoother running**
- Locks into the SL3® Snail Lock Adapter
- Maximum RPM 10,000
Aggressive Grit
Cut Tube Repair Kit
For Original Electric Seam Phantoms with a cut tube. This kit also replaces the grit shield with a larger version to prevent further cutting. The arbor spacer allows for more wear from the SL3 turbos. Note: the current tube is made from an upgraded material and is now red.
Not for use with Seam Phantom 2.0
Kit includes:
(1) Vinyl Tube
(1) Grit Shield
(1) Arbor Spacer (Thickness 0.19 inches)
White Rub Plate – Original Sink BULL™
This is a replacement white plastic rub plate for the lower surface of the original Sink BULL™. This kit includes 6 extra attachment screws.
- Fits the original Sink BULL™
- Does NOT fit the New Sink BULL™LT
*Updated* Spray Shield
No. 105. Stainless steel spray shield for the Original Electric Seam Phantom® . This replaces the old black aluminum spray shield.
Not for use on Seam Phantom 2.0.
SL3® 3 Inch Cup Wheel – Medium Grit **IMPROVED**
The SL3® 3 inch cup wheel can be used free-hand for heavy stock removal. It can also be used with the Seam Phantom® to grind back edges and clean up laminations.
**Now with IMPROVED BALANCE for smoother running**
- Locks into the SL3® Snail Lock Adapter
- Maximum RPM 10,000
Medium Grit
SL3® Snail Lock Adapter (Cosmetic Blem)
- Fits 5/8-11 Threads
- Balanced to eliminate vibration
- Snail lock attachment grips all SL3® components
These SL3 Adapters still maintain full functionality and superb balance, and are only damaged cosmetically (scratches, small dents, etc.).
SL3® 3 Inch Rigid Turbo Abrasive, 300 Grit (Cosmetic Blem)
3″, rigid backed, turbo abrasive
- 300 grit – Popular replacement turbo for the Seam Phantom®
- Wet use only
- 3 1/8″ actual outside diameter
- Locks into the SL3® Snail Lock Adapter
- Maximum RPM 4000
Ultra Guide, 92″
Designed from the ground-up for use with the Seam Phantom® 2.0. This guide provides next-level accuracy when producing superior seams in stone slab material. This is the long guide to use with the new Seam Phantom® 2.0
*Note: This guide will not work with the original Seam Phantom unless you change out the wheels
*Note: This item is considered “oversize” by FedEx. The shipping cost will include additional fees for “oversize” and handling.
3″ Rapid Z™-DRUM Cap
No. 203, Cap for Rapid ZTM-DRUM
Retains the diamond drum on the Rapid ZTM-DRUM
O-Ring
NO. 34, O-Ring, Sold individually.
For use on the Original Electric Seam Phantom
Not for use on Seam Phantom 2.0
Seam Phantom® 2.0 Air Package
The Seam Phantom® 2.0 is the updated system for grinding superior seams in all types of stone and quartz. Kit includes the new Ultra Guide double-sided rail for producing near-perfect mating seam halves.
The Air Seam Phantom®2.0 is designed to mount to several brands of Air Polishers – maximum polisher nose diameter of 2.125″. (Click Here for Image)
- Made in the U.S.A.
- Polisher sold separately
Kit Includes:
- Seam Phantom® 2.0 (LT or DLX version)
- 46″ Ultra Guide (92″ Sold Separately)
- SL3 Snail Lock Adapter – 5/8-11Thread (call our office for M14 threaded version)
- SL3 Abrasive Kit including:
- 60 Grit SL3 Rigid Turbo
- 150 Grit SL3 Rigid Turbo
- 300 Grit SL3 Rigid Turbo
- 2″ SL3 Cup Wheel
- Arbor Extension – 5/8-11 Thread (call our office for M14 threaded version)
- Air Polisher Adapter
- 2 Gauge Blocks
- 2 Track Clamps
- All Required Hardware
- Polisher sold separately
All DLX Models are Currently Out-of-Stock. Please check with our distributors if you need one now. We do have many LT units available.
4″ Redeemer Resin Abrasive, 3000 Grit
4″ Flexible Resin diamond abrasive with hook & loop attachment
- 3000 Grit
- 3.9″ actual outside diameter
- Color-coded purple
- Perfect for top polishing natural granite and quartzite.
- This is the resin pad we supply in our Top Polish Kit
- Requires less down pressure than other resin pads used for top polishing
- Will create a polish with exceptional clarity at low speeds or high speeds.
- Always use plenty of water – never run dry
- Drive it with a True 4″ Rigid Hook and Loop backer when top polishing
Ultra Guide, 46″
Designed from the ground-up for use with the Seam Phantom® 2.0. This guide provides next-level accuracy when producing superior seams in stone slab material.
This is the guide provided with every new Seam Phantom® 2.0
*Note: This guide will not work with the original Seam Phantom unless you change out the wheels
NSI Radius Templates – 2 Piece Set
We’ve been making and using these templates for the past few years, and they have become an essential tool for our Fabricators and Templator . Use them to mark out accurate radii for hand fabrication or to show customers what a specific inside or outside corner radius will look like. The radii are slightly undersized to fit a Presto™ white-out pen. The center of the line will be true to size. The back of the template is relieved to stop white-out from wicking underneath.
- Combined Total of 12 Different Corner Radii
- All text is embossed and will not rub off.
- Presto pen not included
- Colors will vary
Set includes two templates:
(1) Radius Template 1
(1) Radius Template 2
https://youtu.be/aroGKpTzJZ8
SL3® 4″ FLEXIBLE Hook and Loop Backer (3.6″ actual diameter)
4″, Flexible, hook and loop backer (3.6″ actual diameter to fit 4″ resin abrasives)
- Locks into the SL3® Snail Lock Adapter
- Designed with a “hook” face for use with hook & loop style abrasives
- Intended for use with a flexible 4″ resin pad to polish smooth inside curves
- Perfect for polishing inside curves on sink cutouts
SL3® 3 Inch Rigid Turbo Abrasive, 2000 Grit
3″, rigid backed, turbo abrasive
- 2000 grit
- Wet use only
- 3 1/8″ actual outside diameter
- Locks into the SL3® Snail Lock Adapter
- Maximum RPM 4000
Metric Screw and Shim Washer Kits
SCREW KIT 27 – Contains (4) #27 screws and (4) #31 shim washers. These screws are used to attach the Original Seam Phantom to a Makita Grinder or air polisher adapter. The shim washers are used to fine-tune the grinding angle.
SCREW KIT 327 – Contains (4) #327 screws and (4) #31 shim washers. These are the longer screws used to attach a modified Seam Phantom to a Makita Center Water Polisher (PW5001C) through an adapter. The shim washers are used to fine-tune the grinding angle.
Neither of these kits is used for Seam Phantom 2.0
4″ Redeemer Resin Abrasive, 1000 Grit
4″ Flexible Resin diamond abrasive with hook & loop attachment
- 1000 Grit
- 3.9″ actual outside diameter
- Color-coded dark green
- Perfect for top polishing natural granite and quartzite
- This is the resin pad we supply in our Top Polish Kit
- Requires less down pressure than other resin pads used for top polishing
- Will create a polish with exceptional clarity at low speeds or high speeds
- Always use plenty of water – never run dry
- Drive it with a True 4″ Rigid Hook and Loop backer when top polishing
3″ Rapid Z™-DRUM Arbor Key
No. 240, Key
Replacement key for the 3″ Rapid ZTM-DRUM
Rapid Z™-CUT Screws
No. 23, Screws for bearing ring
Sold in a pack of (4) #23 screws
Replacement screws used to attach the large outer bearing ring on a Rapid Z™-CUT
Rapid-Z™ Bolt and Washer Kit
No. 21 & No. 22 Bolt Kit for Rapid Z™-CUT and Rapid Z™-DRUM
Sold as a kit with (1) #21 bolt and (1) #22 washer
Used to retain the blades and drum wheels on the Rapid Z™-CUT and Rapid Z™-DRUMS
P-Clip Kit
NO. 5 & No. 6, P-Clip and screw kit
Sold as a kit with (1) #5 P-Clip and (1) #6 screw
Used to attach the rub plate water supply tube to the Original Electric Seam Phantom body.
Not for use on Seam Phantom 2.0
SL3® 7″ RIGID Hook and Loop Backer (6.8″ actual diameter)
7″, RIGID, hook and loop backer (6.8″ actual diameter)
- Locks into the SL3® Snail Lock Adapter
- Designed with a “hook” face for use with hog’s hair
- This is the 7″ backer we provide in our top polish kit to drive the 7 3/4″ Natural Tan Fiber Pad
SL3® 5″ RIGID Hook and Loop Backer (4.8″ actual diameter)
5″, RIGID, hook and loop backer (4.8″ actual diameter)
- Locks into the SL3® Snail Lock Adapter
- Designed with a “hook” face for use with hook & loop style abrasive
- Machined flat for smooth running
SL3® Snail Lock Adapter (M14 Version)
- Fits M14 Threads
- Balanced to eliminate vibration
- Snail lock attachment grips all SL3® components
Also available in 5/8-11 thread.
Twist SHIM™ 200 Piece Can
Twist Shims™ is a product designed specifically for leveling stone countertops over a plywood sub-top or in other hard-to-access areas. They stand 0.90 inches tall and can be installed in three easy steps. Twist Shim Driver not included.
- Drive – drive Twist SHIM™ through 5/8″ holes drilled at desired shim locations
- Level – place countertop on cabinet and adjust level from underside by rotating Twist SHIM™
- Glue – inject adhesive through Twist SHIM™ to permanently lock counter in place
Twist Shim Driver (sold separately here) required for installation and adjustment.
Click Here to Watch Our Twist SHIM™ Video!
*Updated* Grit Shield (Stainless Steel)
No. 108. Grit Shield for Original Seam Phantom and Seam Phantom 2.0, universal replacement, sold individually.
4″ Redeemer Resin Abrasive, 2000 Grit
4″ Flexible Resin diamond abrasive with hook & loop attachment
- 2000 Grit
- 3.9″ actual outside diameter
- Color-coded orange
- Perfect for top polishing natural granite and quartzite.
- This is the resin pad we supply in our Top Polish Kit
- Requires less down pressure than other resin pads used for top polishing
- Will create a polish with exceptional clarity at low speeds or high speeds.
- Always use plenty of water – never run dry
- Drive it with a True 4″ Rigid Hook and Loop backer when top polishing
1″ Rapid Z™-DRUM – Coarse
A 1″ diameter vacuum brazed drum wheel, specifically designed for use with the Sink BULL™. This is the bit you need to clean out the tight corner radius on square sinks. Available in two grits with a top bearing to ride along the template. The coarse grit cleans up the extra material left by the Rapid Z™-CUT and the fine grit further smooths the surface leaving it ready to polish. The height matches the Rapid Z™-CUT so height adjustments on the Sink BULL are not required between bits. It is center water feed compatible (note: the Sink BULL™ does not use center water feed).
- Fits 5/8-11 arbor threads (M14 version available)
- Height matched to the Rapid Z™-CUT
- Center water feed compatible
- Maximum RPM 8500
- Coarse grit (30/40 grit)
Rapid Z™-CUT Bearing Press
No. 401, Bearing press
This is the press used to install the bearing in the Rapid Z™-CUT bearing replacement video. We offer it here as a convenience.
Click Here to Watch Our Rapid Z™ Bearing Replacement Video!
Valve Bracket Assembly
NO LONGER AVAILABLE
No. 117, SOLD AS AN ASSEMBLY, INCLUDES 2 SET SCREWS #19
SL3® 3 Inch Cup Wheel – Fine Grit **IMPROVED**
The SL3® 3 inch cup wheel can be used free-hand for heavy stock removal. It can also be used with the Seam Phantom® to grind back edges and clean up laminations.
**Now with IMPROVED BALANCE for smoother running**
- Locks into the SL3® Snail Lock Adapter
- Maximum RPM 10,000
Fine Grit
Seam Phantom® 2.0 Electric Package
The Seam Phantom® 2.0 is the updated system for grinding superior seams in all types of stone and quartz. Kit includes the new Ultra Guide double-sided rail for producing near-perfect mating seam halves.
The Electric Seam Phantom® 2.0 is designed to mount onto several different electric grinders. Select one of the following mounting kits at time of purchase:
- Makita Electric Grinders 9564CV, 9565CV, GA5042C, GA4542C
- Milwaukee Electric Grinder 6117-33D
- Metabo Electric Grinder WEV15-125HT
- Alternate Makita Electric Grinder GA5090 (CANADA)
- Made in the U.S.A.
- Grinders sold separately
Kit Includes:
- Seam Phantom® 2.0 (LT or DLX version)
- 46″ Ultra Guide (92″ Sold Separately)
- SL3 Snail Lock Adapter – 5/8-11Thread (call our office for M14 threaded version)
- SL3 Abrasive Kit including:
- 60 Grit SL3 Rigid Turbo
- 150 Grit SL3 Rigid Turbo
- 300 Grit SL3 Rigid Turbo
- 2″ SL3 Cup Wheel
- Water Kit with Hose, Nozzle, Valve and Mounting Bracket
- Spray Shield
- 2 Gauge Blocks
- 2 Track Clamps
- All Required Hardware
- GFCI Adapter
- Grinders sold separately
All DLX Models are Currently Out-of-Stock. Please check with our distributors if you need one now. We do have many LT units available.
Sink BULL™ Height Adjustment Handle Kit
Replacement Sink BULL™ height adjustment handle includes bolt and washer.
- Universal replacement for Sink BULL and Sink BULL LT
- Sold as a kit
SL3® 7″ FOAM Hook and Loop Backer (6.8″ actual diameter)
7″ hook and loop backer with FOAM padding (6.8″ actual diameter)
- Locks into the SL3® Snail Lock Adapter
- Designed with a “hook” face for use with hook & loop style abrasives
- Machined flat for smooth running
- 1/4″ of semi-soft foam padding under the “hook” to provide cushion
- Designed specifically for quartz restoration specialists
SL3® True 4″ FOAM Hook and Loop Backer (4.0″ actual diameter)
True 4″ hook and loop backer with FOAM padding (4.0″ actual diameter)
- Locks into the SL3® Snail Lock Adapter
- Designed with a “hook” face for use with hook & loop style abrasives
- Machined flat for smooth running
- 1/4″ of semi-soft foam padding under the “hook” to provide cushion
- Designed specifically for quartz restoration specialists
1″ Rapid Z™-DRUM – Fine
A 1″ diameter vacuum brazed drum wheel, specifically designed for use with the Sink BULL™. This is the bit you need to clean out the tight corner radius on square sinks. Available in two grits with a top bearing to ride along the template. The coarse grit cleans up the extra material left by the Rapid Z™-CUT and the fine grit further smooths the surface leaving it ready to polish. The height matches the Rapid Z™-CUT so height adjustments on the Sink BULL are not required between bits. It is center water feed compatible (note: the Sink BULL™ does not use center water feed).
- Fits 5/8-11 arbor threads (M14 version available)
- Height matched to the Rapid Z™-CUT
- Center water feed compatible
- Maximum RPM 8500
- Fine Grit (120/150 grit)
3″ Rapid Z™-CUT Outer Ring
No. 107, Outer bearing ring
Large outer ring used on the Rapid Z™-CUT with new blades
Rapid Z-CUT Screws Sold Separately.
3″ Rapid Z™-CUT Inner Ring
No 105, Inner bearing ring
Inner ring that is pressed onto the template follower bearing on a Rapid Z™-CUT
Bearing sold separately
SL3® 3 Inch Rigid Turbo Abrasive, 3000 Grit
3″, rigid backed, turbo abrasive
- 3000 grit
- Wet use only
- 3 1/8″ actual outside dimater
- Locks into the SL3™ Snail Lock Adapter
- Maximum RPM 4000
Seam Phantom 2.0 DLX Trigger Kit
Replacement Trigger Kit for the Seam Phantom 2.0 DLX
We have upgraded to a new, stronger, carbon fiber-reinforced black trigger for strength and durability. The Red Trigger is no longer available.
Both triggers are interchangeable.
- Includes both Pivot Pins and E-Clips
- Block the spring-loaded side open to release tension on the trigger before replacement
UPDATED Valve Bracket
Updated version of No. 117, sold individually. This is the bracket only, does not include valve, elbow fitting, or attachment screws.
For use on all Electric Seam Phantoms that require external water feed.
Purchase VALVE221 for use with this Bracket. Watch the video below for more info.
.
.
Bolt
NO. 16, Bolt to attach the Original Seam Phantom Knob, Sold individually
Not for use on Seam Phantom 2.0
SL3® 3 Inch Floating Turbo Abrasive, 2000 Grit
3″ Turbo abrasive with semi-rigid plastic laminate and hook & Loop attachment for use with the 3″ Center Hub Backer and SL3® Snail Lock Adapter.
- 2000 grit
- Wet use only
- 3 1/8″ outside diameter
- Color-coded orange
- Maximum RPM 4000
*NOT For Dressing Seams With The Seam Phantom®
SL3® True 4″ FOAM Hook and Loop Backer (4.0″ actual diameter) (Cosmetic Blem)
True 4″ hook and loop backer with FOAM padding (4.0″ actual diameter)
- Locks into the SL3® Snail Lock Adapter
- Designed with a “hook” face for use with hook & loop style abrasives
- Machined flat for smooth running
- 1/4″ of semi-soft foam padding under the “hook” to provide cushion
- Designed specifically for quartz restoration specialists
SL3® 7″ RIGID Hook and Loop Backer (6.8″ actual diameter) (Cosmetic Blem)
7″, RIGID, hook and loop backer (6.8″ actual diameter)
- Locks into the SL3® Snail Lock Adapter
- Designed with a “hook” face for use with hog’s hair
- This is the 7″ backer we provide in our top polish kit to drive the 7 3/4″ Natural Tan Fiber Pad
Ultra Guide, 46″ (Cosmetic Blem)
Designed from the ground-up for use with the Seam Phantom® 2.0. This guide provides next-level accuracy when producing superior seams in stone slab material.
This is the guide provided with every new Seam Phantom® 2.0
These guides are functionally perfect but contain ugly scratches, gouges and anodizing burns. Too good to throw away – we are offering them at 20% discount to our customers!!
**Limited Quantity**
*Note: This guide will not work with the original Seam Phantom unless you change out the wheels
SL3® 3″ FOAM Hook and Loop Backer (3.0″ actual diameter)
3″ hook and loop backer with FOAM padding (3.0″ actual diameter)
- Locks into the SL3® Snail Lock Adapter
- Designed with a “hook” face for use with hook & loop style abrasives
- 3/8″ of semi-soft foam padding under the “hook” to allow flex into contours
- Designed specifically for use with 4″ flexible resin pads for polishing Ogee – “the best Ogee polishing pad that we have used”
3″ Rapid Z™-DRUM Replacement – Coarse
Replacement drum for the 3″ Rapid Z™-DRUM. Vacuum brazed diamond abrasive can be flipped on the arbor to gain extra life.
- Maximum RPM 8500
- Reversible
- Coarse Grit (30/40 grit)
SL3® 3 Inch Floating Turbo Abrasive, 3000 Grit
3″ Turbo abrasive with semi-rigid plastic laminate and hook & Loop attachment for use with the 3″ Center Hub Backer and SL3® Snail Lock Adapter.
- 3000 grit
- Wet use only
- 3 1/8″ outside diameter
- Color-coded purple
- Maximum RPM 4000
*NOT For Dressing Seams With The Seam Phantom®